A short ramp cutting through a curb or built up to it....
Search Results "Built-In Seating"
Commonly Searched Documents
-
CURB RAMP
-
1607A.8 Loads on handrails, guards, grab bars, seats and vehicle barriers
[See subsections ...]
-
Transfer Supports: ADA Standard Section 1008.4.5
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
11B-1008.4.5 Transfer supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
F2
If there is a built-in reception or other type of counter, does it have a section that is at least three feet long that is no higher than 36 inches above the floor or is there a nearby surface...
-
§ 36.304(g)(5)
(5) With respect to facilities built before March 15, 2012, the requirements in this section for accessible means of entry for swimming pools, wading pools, and spas, as set forth in sections...
-
Flush Controls: ADA Standard Section 604.6
Section 604.6 covers the current ADA Standards for water closets flush controls.
-
TRANSFER DEVICE
[DSA-AC] Equipment designed to facilitate the transfer of a person from a wheelchair or other mobility aid to and from an amusement ride seat....
- World Federation of the Deaf
-
CURB RAMP
A short ramp cutting through a curb or built up to it....
-
CURB RAMP
A short ramp cutting through a curb or built up to it....
-
Attachment J
The toilet’s centerline is 19 inches from the side wall, the toilet seat height is 20 inches, and the flush valve control is located on the closed side of the toilet. ...
-
Shower Enclosures: ADA Standard Section 608.8
Section 608.8 covers the current ADA Standards for enclosures for shower compartments.
-
Submerged Depth: ADA Standard Section 1009.2.8
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
-
Clear Floor or Ground Space: ADA Standard Section 903.2
Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
11B-608.8 Shower enclosures
Enclosures for shower compartments shall not obstruct controls, faucets, and shower spray units or obstruct transfer from wheelchairs onto shower seats....
-
11B-1009.2.8 Submerged depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (457 mm) minimum below the stationary water level....
-
(8) the City's policies and procedures
inspection for compliance with federal disability access design standards or specific sign-off from the relevant City official that a project is in full compliance with those standards as built...
-
Scope: ADA Standard Section 201.1
Section 201 discusses the scope of the ADA Standards.
-
11B-206.2.8 Employee work areas
The Department of Justice ADA regulations provide additional guidance regarding the relationship between these requirements and elements that are not part of the built environment....
-
1. Public Rights-of-Way
Title II of the ADA applies to state and local government facilities, and the ABA requires that buildings or facilities that were designed, built, or altered with federal dollars or leased...
-
AISLE
[DSA-AC] A circulation path between objects such as seats, tables, merchandise, equipment, displays, shelves, desks, etc., that provides clearances in compliance with this code....
-
M15
Are all built-in dispensers, receptacles, or equipment mounted so the front does not extend more than 4 inches from the wall if the bottom edge is between 27 inches and 80 inches above the...
-
H14
Are all built-in dispensers, receptacles, or equipment mounted so the front does not extend more than 4 inches from the wall if the bottom edge is between 27 inches and 80 inches above the...