Exceptions: The floor or landing at primary entry doors, required exit doors and secondary exit doors where a change in elevation occurs between the interior and the exterior surface of...
You’ve got design teams, and it’s a matter of educating the project design teams in areas that they can bring their design expertise in. And it’s not a standard....
Section 103 of the ADA Standards covers information on equivalent facilitation in the 2010 ADA Standards.
The American Association on Health and Disability (AAHD) is a cross-disability national non-profit 501(c)(3) organization committed to promoting health and wellness initiatives for children...
2010 California Standards for Accessible Design ETA Editor's Note This document contains excerpts from the 2010 California Building Code, relating to Safe Harbors, and should not...
Each area of refuge shall be designed to minimize the intrusion of smoke....
Integrated Setting One of the main goals of the ADA is to provide people with disabilities the opportunity to participate in the mainstream of American society....
Compliance Advisory Reference Manual published by the State of California Department of General Services, Division of the State Architect, but it includes and compares requirements of Americans...
Compliance Advisory Reference Manual published by the State of California Department of General Services, Division of the State Architect, but it includes and compares requirements of Americans...
Section 407.4.7.1.2 covers the current ADA Standards for the location of designations and indicators on elevator car control buttons.
The sophisticated design of the Barton faucet encompasses a sleek body with hard edges, coordinating with a variety of kitchen styles with ease....
The element or feature meets the minimum technical specifications under the 2010 Americans with Disabilities Act (ADA) Standards for Accessible Design and the Architectural Barriers Act...
does not have to be horizontally straight to provide such a cue and that achieving straight segments two feet long within marked crossings is very difficult under standard intersection design...
The global® series provides a quiet and compact design to fit any budget Heavy-Duty, One-Piece Cover Options Flame-retardant white ABS Steel with white epoxy finish (...
FEATURES: Offers visibility for wheelchair patients Frame fabricated of 20 gauge stainless steel with a satin finish Mirror is tapered from 4" (102 mm) at...
Extends 2 5/16” (59 mm) from wall or door. Suitable for robes, clothing, or small bags. Satin finish.
Fabricated of 12 gauge type 304 stainless steel with a satin finish. Back plate is fabricated of 14 gauge stainless steel. If hook is excessively loaded, it will snap down for...
4" (100 mm) wide stainless steel bar forms hook at each end. Unit extends 1 5/8" (40 mm) from wall.
Single Robe Hook shall be fabricated of stainless steel alloy 18-8, type 304. Post shall be 1/2" x 1" (13 X 25) rectangular tubing with formed mounting flange and bracket welded on...
5023.100 For deck-mounted fitting • Vitreous china • Flushing rim and vertical cleansing spray • Integral overflow • Two bolt caps included Shown with 7391.733 Hampton...
Fabricated of type 304 stainless steel with satin finish. Strip is 4" (100 mm) high with edges returning 1/2" (13 mm) to the wall.
Two hooks, set apart at 90° on center, extend 2 3/8” (60 mm) from wall or door. Suitable for robes, clothing, or small bags. Satin finish.
Chrome-plated 3" (75 mm) projection. Rubber bumper protects wall surface.