Guards shall be located along open-sided walking surfaces, including mezzanines, equipment platforms, aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured...
Search Results "Transfer Surface Height"
Filters
Commonly Searched Documents
-
1015.2 Where required
-
Location and Size
The side rails are 20 inches minimum in length, 6 inches minimum in height above the table surface, and 1 inch measured horizontally from the adjacent edge of the table surface....
-
M305.2.4 Cross Section (Section-by-Section Analysis)
The proposed rule did not provide specific requirements for the cross section of transfer supports....
-
Are accessible spaces required in temporary parking lots and in unpaved lots, such as gravel or grass lots?
In all parking facilities, including gravel or grass lots, parking spaces and access aisles must be marked and have firm, stable, and slip resistant surfaces as specified for accessible...
-
Amusement Rides: ADA Standard Section 206.2.9
Section 206.2.9 covers scoping requirements in the most current ADA Standards for accessible routes in amusement rides.
-
11B-206.2.9 Amusement rides
Amusement rides required to comply with Section 11B-234 shall provide accessible routes in accordance with Section 11B-206.2.9. Accessible routes serving amusement rides shall comply...
-
Handrails [§405.8, §505]
The Standards do not require lower handrails serving children except at ramps serving play areas, but include a recommended height (28” max.) and separation (9” min.) from the required handrail...
-
Drinking Fountains for Standing Persons
Specifications for drinking fountains for standing persons address the height of the spout outlet (602.7)....
-
1008.2.6 Ground Surfaces
1008.2.6 Ground Surfaces. Ground surfaces on accessible routes, clear floor or ground spaces, and turning spaces shall comply with 1008.2.6. Advisory 1008.2.6 Ground Surfaces....
-
1j
Is there an adjustable height shower wand with at least a 60" long hose provided for persons who must shower from a seated position?...
-
11B-1005.3.2 Extended ground or deck surface
The ground or deck surface shall extend 12 inches (305 mm) minimum beyond the inside face of the railing....
-
Inpro Corporation JointMaster® 300 Series Recessed Mount Floor Expansion Joint Covers
The patented "no-bump" design makes this product ADA compliant. Features & Benefits Patented "no-bump" configuration ADA compliant Gasketed to...
-
Inpro Corporation JointMaster® 787 Series Floor Expansion Joint Covers
The integral, high durometer seal of the 787 deters water from entering the system and acts as a noise dampening device. Features & Benefits Seismic capable system...
-
Inpro Corporation JointMaster® 101 Series Floor Expansion Joint Covers
The 101 Series is adaptable to many flooring finishes, including ceramic tile, marble, stone, vinyl, tile and carpet. Features & Benefits: Dual durometer seal...
-
Inpro Corporation JointMaster® 925 Fire Barrier System Expansion Joint Systems
The 925 Fire Barrier system meets the “Hose System Test” for masonry and concrete walls. Features & Benefits Economical system for joint widths up to 3"...
-
Inpro Corporation JointMaster® 103 Series-VCT Expansion Joint Systems
The unique frame design of the 103 creates a smooth transition over joint for wheeled equipment. Features & Benefits Seals absorb limited serviceable seismic...
-
Inpro Corporation JointMaster® 441 Series-Recessed Mount Expansion Joint
The 441 is a highly modifiable system with varying thicknesses of aluminum or stainless steel cover plates that can meet many project’s loading requirements. Features &...
-
405.9.1 Extended Floor or Ground Surface
The floor or ground surface of the ramp run or landing shall extend 12 inches (305 mm) minimum beyond the inside face of a handrail complying with 505....
-
SlabGasket Expansion Joint Replacement
Demonstration of Slabgasket Expansion Joint Replacement
-
What is an Expansion Joint Test Kit
Requires the Registered User plan or above. Login!
-
Repairing Expansion Joints - GapArmour Basics
Requires the Registered User plan or above. Login!
-
Filling expansion joints by GapArmour.com
Requires the Registered User plan or above. Login!
-
SuperDeck Nature Trail
Superdeck Features + Benefits: ADA, DNR, US Army Corp of Engineers & Coast Guard complied requirements Low-maintenance, no-bounce, non-skid, color-stabilized polyethylene surface...
-
1008.2.6 Ground Surfaces
Ground surfaces on accessible routes, clear floor or ground spaces, and turning spaces shall comply with 1008.2.6. Advisory 1008.2.6 Ground Surfaces....
