Search Results "BAR: Beach Access Route"
-
Figure 502.3 Parking Space Access Aisle – Drawing from the U.S. Access Board
-
1016.8 Resting Intervals
Resting intervals shall comply with 1016.8.
-
1016.8.1 Length
The resting interval length shall be 60 inches (1525 mm) long minimum.
-
Technical Requirements [1016]
[See subsections ...]
-
Cross Slope [1016.7.2]
Cross slope is the side-to-side slope of the surface of an ORAR. When the surface is constructed of concrete, asphalt, or boards, the cross slope must be no steeper than 1:48 (2...
-
Minimum Clear Corridor Width
A few commenters from the disability community advocated a minimum clear corridor width of 48 inches. However, the majority of commenters on this issue had no objection to the...
-
2.7 Tread Obstacles
Where tread obstacles exist on the surface of an ORAR, they shall not exceed 1 inch (25 mm) in height. Where the surface is paved or is elevated above the natural ground,...
-
1016.8.1 Length
This section requires resting intervals to be 60 inches long minimum.
-
2.5.2 Length
The resting interval length shall be 60 inches (1525 mm) long minimum.
-
2.5 Resting Intervals
Resting intervals shall comply with 2.5.
-
2.6.1 Size
The passing space shall be either:
-
1016.8 Resting Intervals
Resting intervals shall comply with 1016.8.
-
1016.8.1 Length
The resting interval length shall be 60 inches (1525 mm) long minimum.
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
1016.6 Openings
This section requires openings in the surface of outdoor recreation access routes, passing spaces, and resting intervals such as spaces between the boards in a boardwalk and drainage grates...
-
Residential Dwelling Units Provided by Entities Subject to HUD Section 504 Regulations: ADA Standard Section 233.2
Section 233.2 covers scoping requirements in the current ADA Standards for residential dwelling units provided by entities subject to HUD Section 504 Regulations.
-
4.26.4 Eliminating Hazards
A handrail or grab bar and any wall or other surface adjacent to it shall be free of any sharp or abrasive elements. Edges shall have a minimum radius of 1/8 in (3.2 mm)....
-
4.26.4 ELIMINATING HAZARDS
A handrail or grab bar and any wall or other surface adjacent to it shall be free of any sharp or abrasive elements. Edges shall have a minimum radius of 1/8 in (3.2 mm)....
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
1. Accessible toilet
Accessible toilet with rear and side grab bars, clear floor space for wheelchair transfer, and an accessible flush valve....
-
11B-609.2.1 Circular cross section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
Dispensers: ADA Standard Section 604.9.6
Section 604.9.5 covers the current ADA Standards for dispensers in children's use toilet compartments.
-
11B-809.10.8.7 Mirrors and towel bars
Where towel bars are provided they shall be installed 40 inches (1016 mm) maximum above the finish floor to the top of the bar....
