(a) Study The National Council on Disability shall conduct a study and report on the effect that wilderness designations and wilderness land management practices have on the...
Search Results "Assembly Area"
-
12207(a) Study
-
12162(a)(2)(D) Special rule for bi-level dining cars for individuals who use wheelchairs
(D) Special rule for bi-level dining cars for individuals who use wheelchairs Bi-level dining cars shall not be required to
-
1008.2.5.3 Handrails
1008.2.5.3 Handrails. Where required on ramps serving play components, the handrails shall comply with 505 except as modified by 1008.2.5.3. EXCEPTIONS: 1. Handrails shall not be...
-
4.3.11.1(7)
(7) An elevator lobby when elevator shafts and adjacent lobbies are pressurized as required for smokeproof enclosures by local regulations and when complying with requirements herein...
-
4.1.3 ACCESSIBLE HOUSING
Accessible housing shall comply with the requirements of 4.1 and 4.34 except as noted below:
-
4.3.10* EGRESS
Accessible routes serving any accessible space or element shall also serve as a means of egress for emergencies or connect to an accessible place of refuge. Such accessible routes...
-
1015.5 Surface
The surface of clear ground spaces and turning spaces shall be firm and stable.
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951.
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading. [2010 ADAS] Advisory 1002.5 Amusement Ride Seats...
-
17. Exposing Vehicle to Hazards
If the passenger requests that a vehicle follow a path to a pick up or drop off point that would expose the vehicle and its occupants to hazards, such as running off the road,...
-
§ 38.29(e)
(e) For vehicles in excess of 22 feet in length with front-door lifts or ramps, vertical stanchions immediately behind the driver shall either terminate at the lower edge of the...
-
11B-247.1.2.5 Blended transitions
11B-247.1.2.5 Blended transitions. Blended transitions shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.5.
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading. Advisory 11B-1002.5 Amusement ride seats designed...
-
11B-705.1.2.5 Blended transitions
11B-705.1.2.5 Blended transitions. Detectable warnings at blended transitions shall be 36 inches (914 mm) in width.
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951.
-
11B-407.4.1 Car dimensions
Exception: In existing buildings, where existing shaft configuration prohibits strict compliance with Section 11B-407.4.1, existing elevator car configurations that provide a clear floor area...
-
11B-407.4.1 Car dimensions
Exception: In existing buildings, where existing shaft configuration prohibits strict compliance with Section 11B-407.4.1, existing elevator car configurations that provide a clear floor area...
- Willoughby Industries WODF-2-HC Stainless Steel Outdoor ADA Drinking Fountain
- Willoughby Industries WODF-1WM Wall Mounted ADA Stainless Steel Outdoor Drinking Fountain
- Willoughby Industries WODF-3-HC-PET Stainless Steel Outdoor ADA and Pet Drinking Fountain
-
§27.71(c)
(c) The airport shall ensure that there is an accessible path between the gate and the area from which aircraft are boarded....
-
10.4.1(3)
(3) Ticketing areas shall permit persons with disabilities to obtain a ticket and check baggage and shall comply with 7.2....
-
(3) Doors within individual dwelling units
The final Guidelines recommend that doors intended for user passage within individual dwelling units have a clear opening of at least 32 inches nominal width when the door is open 90...
-
11B-407.4.1 Car dimensions
Exception: In existing buildings, where existing shaft configuration prohibits strict compliance with Section 11B-407.4.1, existing elevator car configurations that provide a clear floor area...