Where provided, no fewer than one water closet, one lavatory, and one bathtub or shower shall comply with the applicable requirements of 603 through 610....
Search Results "Shower Grab Bar"
Commonly Searched Documents
- 
    
  
  805.4 Toilet and Bathing Rooms
  
- 
    
  
  [F] WORKSTATION
  Examples include ticket booths; the employee side of grocery store check stands; the bartender area behind a bar; the employee side of snack bars, sales counters and public counters; guardhouses... 
- 
    
  
  1132A.8 Hand-activated door hardware
  Latching and locking doors that are hand-activated and on an accessible route shall be operable with a single effort by lever-type hardware, panic bars, push-pull activating bars or other... 
- 
    
  
  [F] WORKSTATION
  Examples include ticket booths; the employee side of grocery store check stands; the bartender area behind a bar; the employee side of snack bars, sales counters and public counters; guardhouses... 
- 
    
  
  [F] WORKSTATION
  Examples include ticket booths; the employee side of grocery store check stands; the bartender area behind a bar; the employee side of snack bars, sales counters and public counters; guardhouses... 
- 
    
  
  1132A.8 Hand-activated door hardware
  Latching and locking doors that are hand-activated and on an accessible route shall be operable with a single effort by lever-type hardware, panic bars, push-pull activating bars or other... 
- EduCAPTION
- 
    
  
  11B-705.2 Detectable directional texture  
  Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars... 
- 
    
  
  11B-705.2 Detectable directional texture
  Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars... 
- Mockett DH403-BB Square Bar Door Handle Back to Back
- Bobrick Recessed Heavy-Duty Soap Dish and Bar B-4390
- Allegion Von Duprin 88 Series Cross Bar Exit Device
- Allegion Von Duprin 55 Series Cross Bar Exit Devices
- 
    
  
  Section 36.406(e) Housing at a Place of Education
  In addition, the residential facilities standards do not require accessible roll-in showers in bathrooms, while the transient lodging requirements require some of the accessible units to... 
- 
    
  
  Accessible Plumbing Fixtures
  The Board has added clarification that at least one water closet, lavatory, and bathtub or shower, where provided, must be accessible (807.2.4).... 
- AIA White Paper: A Proposal for additions to accessibility Standards for Nursing Home & Assisted Living Residents in Toileting and Bathing
- 
    
  
  NSS Questions and Concerns
  A revealing example: The Red Cross’s 2011 survey version asks regarding restroom grab bars: “Appropriate Grab Bars yes/no,” as compared to the DOJ questions which asks: “Is a horizontal... 
- 
    
  
  1. Making Facilities Accessible and Usable
  For example: A restroom may be modified to meet standard accessibility requirements (including wider door and stalls, and grab bars in specified locations) but it may be necessary to install... 
- 
    
  
  F234 Residential Facilities
  For example, grab bars do not have to be installed during the construction of residential dwelling units if the proper reinforcement is provided to facilitate their later installation as... 
- 
    
  
  M305.3 Standing Supports (Section-by-Section Analysis)
  In the MDE NPRM preamble, the Access Board noted that it was considering adopting the cross section dimensions for grab bars from the 2004 ADA and ABA Accessibility Guidelines and applying... 
- 
    
  
  2010 ADA Standards
  For example, if this document requires “1½ inches,” avoid specifying “1½ inches plus or minus X inches. ”Where the requirement states a specified range, such as in Section 609.4 where grab... 
- 
    
  
  104.1.1 Construction and Manufacturing Tolerances
  Where the requirement states a specified range, such as in Section 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate... 
- 
    
  
  104.1.1 Construction and Manufacturing Tolerances
  Where the requirement states a specified range, such as in 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate tolerance... 
- 
    
  
  1 - Design and drawing
  Tolerances do not apply where a requirement states a range; for example, that grab bars must be installed between 33 inches and 36 inches above the finished floor.... 
