Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1219 mm) maximum and the low side...
Search Results "Element-by-Element"
Commonly Searched Documents
-
11B-308.3.1 Unobstructed
-
101.1 General
This document contains scoping and technical requirements for accessibility to sites, facilities, buildings, and elements by individuals with disabilities....
-
Private Funds Provided by Tenant
Based on the Exception, the path of travel elements and spaces under the landlord’s authority would not be subject to review or inspection....
-
205 Operable Parts
Mechanisms 205 Operable Parts 4.1.3(13) Controls and operating mechanisms in accessible spaces, along accessible routes, or as parts of accessible elements...
-
202.5 Alterations to Qualified Historic Buildings and Facilities
toilet facilities would threaten or destroy the historic significance of the building or facility, the exceptions for alterations to qualified historic buildings or facilities for that element...
-
205 Operable Parts
Clarification has been added that operable parts on accessible elements are required to comply as well, which is consistent with technical provisions for various types of covered elements...
-
202.4 Alterations Affecting Primary Function Areas
If elements of a path of travel at a subject building or facility that have been previously constructed or altered in accordance with the April 1, 1994 Texas Accessibility Standards (TAS...
-
Accessible Route
Sections 206.2.15, 1006.2, and 1006.3 of the 2010 Standards require an accessible route to connect all accessible elements within the boundary of the golf course and, in addition, to connect...
-
§ 1194.21(l)
(l) When electronic forms are used, the form shall allow people using assistive technology to access the information, field elements, and functionality required for completion and submission...
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3....
-
Adaptability
The ability of certain building spaces and elements, such as kitchen counters, sinks, and grab bars, to be added or altered so as to accommodate the needs of individuals with or without...
-
Door Swing [§304.4] and Other Space Requirements
The turning space can overlap other space requirements, including clear floor space required at elements and fixtures....
-
§ 38.127(a)
(a) Sleeping compartments required to be accessible shall be designed so as to allow a person using a wheelchair or mobility aid to enter, maneuver within and approach and use each element...
-
What if a locality is not resurfacing an entire block, but is resurfacing a crosswalk by itself?
Crosswalks constitute distinct elements of the right-of-way intended to facilitate pedestrian traffic....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
5.4.8 Transfer Support Gripping Surface Hazard for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
The gripping surfaces of the transfer support must be free of sharp or abrasive elements and have rounded edges....
-
Barriers to People with Disabilities
Barriers to People with Disabilities - characteristics of spaces, elements, or services covered under the ADA Regulations or ADA Standards for New Construction that do not comply with those...
-
ADAPTABILITY
The ability of certain building spaces and elements, such as kitchen counters, sinks, and grab bars, to be added or altered so as to accommodate the needs of either disabled or nondisabled...
-
8.2 READING AND STUDY AREAS
At least 5 percent or a minimum of one of each element of fixed seating, tables, or study carrels shall comply with 4.2 and 4.32....
-
Can guards or collars be attached to handrails to prevent skateboard traffic?
No, handrail gripping surfaces at egress stairs subject to the Standards must be unobstructed on the top and sides and free of sharp or abrasive elements so that users can maintain a continuous...
-
2.1.3
These are instances where individual products and installation procedures may conform to industry standard tolerances but the final installed element may not meet regulatory, functional,...
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
- HEWI Hinged Support Rail Duo