As described in Section 4.3.2, some types of current diagnostic imaging equipment present serious technical, scientific, and design impediments to improve accessibility of the height of machines...
Search Results "Drive-Up Fare Machine"
-
7.2 Technological and Scientific Considerations
-
E202.5 Undue Burden or Fundamental Alteration (Section-by-Section Analysis)
This section would require that agencies comply with the requirements of the 508 Standards up to the point where conformance would impose an undue burden on the agency or would result in...
-
Common Problems with Parking
Ø There are built-up curb ramps in access aisles. Ø There are no signs, or signs are placed so they can be obstructed by parked vehicles....
-
Accessible Rides
The choice of which type of access that is provided for each ride is left up to the operator or designer....
-
20. Q: What about holding cells and jails that are not accessible?
A: An arrestee with a mobility disability must have access to the toilet facilities and other amenities provided at the lock-up or jail....
-
§ 36.302(f)(9)(i)
For accessible seating in a designated wheelchair area, a public accommodation shall provide up to three companion seats for each person with a disability who requires a wheelchair space...
-
§ 35.138(i)(1)
For accessible seating in a designated wheelchair area, a public entity shall provide up to three companion seats for each person with a disability who requires a wheelchair space, provided...
-
Subtitle B: Public Transportation
Paratransit is a service where individuals with disabilities who are unable to use the regular transit system independently are picked up and dropped off at their destinations....
-
12162(e)(2)(A)(ii)(II) Commuter rail
individuals who use wheelchairs, as soon as practicable but in no event later than 3 years after July 26, 1990, except that the time limit may be extended by the Secretary of Transportation up...
-
4.10.3 Hall Call Buttons
The button designating the up direction shall be on top. (See Fig. 20.) Buttons shall be raised or flush....
-
4.10.3 HALL CALL BUTTONS
The button designating the up direction shall be on top (see Fig. 20). Buttons shall be raised or flush....
-
Error/Omission: Food service queuing areas are too narrow and do not provide adequate clear width for turns.
Result: People who use wheelchairs cannot get to the counter to purchase or pick up food. Sometimes they get into the queuing area and get trapped. Requirement: 4.3.3 Width....
-
§ 38.107(a)(1)
Fold-down or retractable seats or shelves may overlap the clear floor space at a lower height provided they can be easily folded up or moved out of the way....
-
§ 38.123(a)(1)
Fold-down or retractable seats or shelves may overlap the clear floor space at a lower height provided they can be easily folded up or moved out of the way....
-
211.3 More Than Minimum Number
EXCEPTION: Where 50 percent of the drinking fountains yields a fraction, 50 percent shall be permitted to be rounded up or down provided that the total number of drinking fountains complying...
-
III. Results of the Study
With mechanical compaction, the trail can set up....
-
PEMKO 7" Half Saddle/Offset Saddle Threshold No. 2727
Half Saddle/Offset Saddle thresholds are supplied predrilled, with #10-24 Phillips, flat head machine screws of appropriate length....
-
PEMKO 5" Latching Panic Saddle Threshold No. 2005-V
Latching Panic thresholds are supplied predrilled, with #10-24 Phillips, flat head machine screws of appropriate length. Allow 3/8" door clearance....
-
PEMKO 5 1/8" Thermal Barrier Threshold No. 252X3-FG
Thermal Barrier thresholds are supplied predrilled, with #10-24 Phillips, flat head machine screws of appropriate length....
-
PEMKO 5" Latching Panic Saddle Threshold No. 2005-P
Latching Panic thresholds are supplied predrilled, with #10-24 Phillips, flat head machine screws of appropriate length. Allow 3/8" door clearance....
-
PEMKO 5 1/2" Half Saddle/Offset Saddle Threshold No. 158
Half Saddle/Offset Saddle thresholds are supplied predrilled, with #10-24 Phillips, flat head machine screws of appropriate length....
-
Pemko 252X2_FG Thermal Barrier Threshold
Thermal Barrier thresholds are supplied predrilled, with #10-24 Phillips, flat head machine screws of appropriate length....
-
PEMKO 6 1/8" Thermal Barrier Threshold No. 273X3-FG
Thermal Barrier thresholds are supplied predrilled, with #10-24 Phillips, flat head machine screws of appropriate length....
-
Allegion LCN 3130 Series Overhead Concealed Door Control
Tested and certified under ANSI Standard A156.4, grade one Specifications Standard 3130 series closer shipped with standard arm, standard track and wood and machine...
