Emergency controls, including the emergency alarm, shall be grouped at the bottom of the panel....
Search Results "Curb Ramp Bottom Landing"
Filters
Commonly Searched Documents
-
11B-407.4.6.4.2 Location
-
11B-303.3 Beveled
Changes in level exceeding ½ inch (13 mm) must comply with 405 (Ramps) or 406 (Curb Ramps). ...
-
Conventional Strollers
These strollers are fairly difficult to maneuver over curbs, so the installation of curb ramps in the public right of way is valuable to these users....
-
R302.3 Continuous Width
Except as provided in R302.3.1, the continuous clear width of pedestrian access routes shall be 1.2 m (4.0 ft) minimum, exclusive of the width of the curb....
-
11B-505.10.2 Top extension at stairs
At the top of a stair flight, handrails shall extend horizontally above the landing for 12 inches (305 mm) minimum beginning directly above the first riser nosing....
-
Section 2. Accessible route
Interior accessible routes may include corridors, floors, ramps, elevators and lifts. Exterior accessible routes may include parking access aisles, curb ramps, walks, ramps and lifts....
-
§100.201 Accessible route
Interior accessible routes may include corridors, floors, ramps, elevators, and lifts....
-
Parking sign height measurement technique
502.6 says "Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign." But which floor or ground surface? ...
-
R305 Detectable Warning Surfaces (Section-by-Section Analysis)
At curb ramps and blended transitions, detectable warning surfaces must extend the full width of the ramp run (excluding flared sides), blended transition, or turning space....
-
R208.1 Where Required
Curb ramps and blended transitions at pedestrian street crossings; 2. Pedestrian refuge islands; 3....
-
303.3 Beveled
Changes in level exceeding ½ inch (13 mm) must comply with 405 (Ramps) or 406 (Curb Ramps). Figure 303.3 Beveled Change in Level ...
-
R302.6 Cross Slope
Cross slope requirements are contained in R304.5.3 for curb ramps and blended transitions, and in R407.3 for ramps....
-
Slope [4.3.7]
Where the running slope of an accessible route exceeds 5% it must be treated as a ramp or curb ramp. A maximum cross slope of 2% is recognized for drainage....
-
13) Detectable warnings
13) Detectable warnings ADAAG: Required on curb ramps, hazardous vehicular areas, and reflecting pools, but not on doors to hazardous areas....
-
Top Extension at Stairs: ADA Standard Section 505.10.2
Section 505.10.2 covers the current ADA Standards for the handrail extensions at the top of the stairs.
-
Portable Units [4.1.2(6)]
Where ramps are provided, it is important that required door clearances are available at the required level landing....
-
LaCantina Contemporary Clad Door System Ramp Sill
Requires the Premium User plan or above. (Login or upgrade your account!) -
LaCantina Aluminum Wood Slider System Ramp Sill
Requires the Premium User plan or above. (Login or upgrade your account!) -
LaCantina Aluminum Slider System ADA Ramp Sill
Requires the Premium User plan or above. (Login or upgrade your account!) -
Q13: Specific Requirements for Road Alteration Projects by Public Entities that Receive Federal Financial Assistance
At that time, DOT’s regulation adopted a modification to Section 406 of the 2004 ADAAG which required the placement of detectable warnings on curb ramps. ...
-
Solutions for Accessibility: Problems Involving Ramps
[See subsections ...]
-
11B-303.3 Beveled
Changes in level exceeding ½ inch (13 mm) must comply with 405 (Ramps) or 406 (Curb Ramps). FIGURE 11B-303.3 BEVELED CHANGE IN LEVEL...
-
303.3 Beveled
Changes in level exceeding ½ inch (13 mm) must comply with 405 (Ramps) or 406 (Curb Ramps). Figure 303.3 Beveled Change in Level...
-
A4.6.3 Parking Spaces
The parking access aisle must either blend with the accessible route or have a curb ramp complying with 4.7....
