Mirrors shall be full length with a reflective surface 18 inches (457 mm) wide minimum by 54 inches (1372 mm) high minimum and shall be mounted in a position affording a view to a person...
Search Results "Ceiling Mounted Patient Lift"
Filters
Commonly Searched Documents
-
11B-803.6 Mirrors
-
AJW Architectural Products U852H Dual Stall Seat Cover Dispenser w/ Flush Mounting - Partition Mounted
Product Features Fabricated of #22 gauge stainless steel with a #4 satin finish Holds 500 seat covers Seat cover dispenser is partition mounted Product Specs Body: Fabricated...
-
Hospital Outpatient Facilities: ADA Standard Section 208.2.1
Section 208.2.1 of the ADA Standards covers information on scoping requirements in the most current ADA Standards for accessible parking at hospital outpatient facilities.
-
11B-805.1 General
Medical care facility and long-term care facility patient or resident sleeping rooms required to provide mobility features shall comply with 805....
-
Elevators
In newly constructed or altered facilities, elevators must comply with specific design standards regarding the following: Hall call button orientation, mounting location, and visual...
-
Neo-Metro Commercial Wall Mounted Metaal Basin 8937 Series
The Metaal Basin is a D-shaped wall mounted stainless steel wash basin with a large round bowl. The P-trap is uniquely similar to its complimentary toilet....
-
M101.1 Purpose
MDE Standards) contain scoping and technical requirements for medical diagnostic equipment (diagnostic equipment) to ensure accessibility to, and usability of the diagnostic equipment by patients...
-
Just Manufacturing Surface Mount Paper Towel Dispenser 400 Capacity
Surface Mount. Exposed Surfaces to have a brush finish. Keyed Tumbler Lock to Secure Cabinet. Capacity (400) C-fold or (525) multi-fold Towels....
-
CRL Jackson 900 Series Floor Mounted Door Closers
08 7100 CRL Jackson Narrow Width Floor Mounted Door Closers 264 Lb....
-
EXHIBIT A
EXHIBIT A Model Communication Assessment Form We ask this information so we can communicate effectively with Patients and/or Companions....
-
10.3.1(9)
intercity rail systems where it is not operationally or structurally feasible to meet the horizontal gap or vertical difference requirements, mini-high platforms, car-borne or platform-mounted...
-
AJW Architectural Products US21 Security Soap Dish, Chase Mounting
Product Features fabricated of #7 gauge stainless steel with a #4 satin finish Soap dish is available with and without drain holes Concealed mounting Unit is designed for security...
-
CHG Hospital Beds Spirit Select
This revolutionary hospital bed addresses the needs of a wide range of hospital settings including regular patient rooms in med-surg....
-
Häfele America Co. Paper Towel Waste Bin Wall Mounted
/16") 300 mm Height (20 1/16") 170 mm Material Bin: Stainless steel Trim: Polyamide Mounting...
-
4.34.6.10* KITCHEN STORAGE
and shelf areas shall comply with 4.25 and shall have the following features: (1) Maximum height shall be 48 in (1220 mm) for at least one shelf of all cabinets and storage shelves mounted...
-
Mammography Equipment
Mammography Equipment A mammography exam typically requires the patient to stand up. Individuals who use wheelchairs will need to have an exam while staying in their wheelchair....
-
Users and Needs
Hospital patients, and especially nursing facility residents, due to their stature, reach, and strength characteristics, typically require the assistance of caregivers during transfer maneuvers...
-
Turning Space: ADA Standard Section 808.2
Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with 304....
-
Circulation Path
An exterior or interior way of passage provided for pedestrian travel, including but not limited to, walks, hallways, courtyards, elevators, platform lifts, ramps, stairways, and landings...
-
11B-605.4 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except that the flush control shall be mounted at a maximum height of 44 inches (1118 mm) above the finish floor....
-
American Specialties Surface Mounted Bottle Opener 0711-B
Surface Mounted Bottle Opener shall be fabricated of alloy 18-8 stainless steel, type 304, No16 gauge of one piece construction....
-
Bobrick TrimLineSeries Countertop Mounted Paper Towel Dispenser B-526
Unit 12 ¾" W, 6" front to back depth (325 x 150mm); 17" (430mm) min. clearance below mounting surface is required....
-
NFPA
or 21.2.1 without additional delay. 4) The current status of the alarm verification feature is shown on the record of completion (see Figure 7.8.2(a), item 4.3). 5) Operation of a patient...
-
Bradley Surface Mounted Stainless Steel Sheet Tissue Dispenser 515
Dispenses Sheet Tissue Satin finish Stainless Steel Surface Mounted...
