Tactile symbols and Characters shall be provided adjacent to the device and shall comply with 703.2....
Search Results "Tactilely Discernible"
-
11B-407.4.9 Emergency communication
-
Floor Designation: ADA Standard Section 407.2.3.1
Section 407.2.3.1 covers the current ADA Standards for elevator floor designations.
-
1011.4, Item 4
Each exit access door from an interior room or area to a corridor or hallway that is required to comply with Section 1011.1, shall be identified by a tactile exit sign with the words “EXIT...
-
1013.4, Item 4
Each exit access door from an interior room or area to a corridor or hallway that is required to comply with Section 1013.1, shall be identified by a tactile exit sign with the words “EXIT...
-
703.4.1 Height Above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
- Figure 703.4.1 Height of Tactile Character Above Finish Floor or Ground – Drawing from the U.S. Access Board
-
Installation Height and Location: ADA Standard Section 703.4
Signs with tactile characters shall comply with 703.4....
-
11B-703.4 Installation height and location
Signs with tactile characters shall comply with Section 11B-703.4....
-
11B-703.4 Installation height and location
Signs with tactile characters shall comply with Section 11B-703.4....
-
Exhibit Design Relating to Low Vision and Blindness: What Visitors with Vision Loss Want Museums and Parks to Know about Effective Communication
Exhibit Design Relating to Low Vision and Blindness What Visitors with Vision Loss Want Museums and Parks to Know about Effective Communication By: Beth Ziebarth,...
-
Exhibit Design Relating to Low Vision and Blindness Summary Report
Exhibit Design Relating to Low Vision and Blindness Summary Report January 10, 2011 National Center on Accessibility National Center on Accessibility, Indiana University -...
-
11B-407.2.3.1 Floor designation
Floor designations shall be provided in both tactile characters and braille. Tactile characters shall be 2 inches (51 mm) high minimum....
-
11B-407.2.3.1 Floor designation
Floor designations shall be provided in both tactile characters and braille. Tactile characters shall be 2 inches (51 mm) high minimum....
-
General: ADA Standard Section 703.1
Where both visual and tactile characters are required, either one sign with both visual and tactile characters, or two separate signs, one with visual, and one with tactile characters, shall...
-
11B-703.1 General
Where both visual and tactile characters are required, either one sign with both visual and tactile characters, or two separate signs, one with visual, and one with tactile characters, shall...
-
11B-703.1 General
Where both visual and tactile characters are required, either one sign with both visual and tactile characters, or two separate signs, one with visual, and one with tactile characters, shall...
-
Location: ADA Standard Section 703.4.2
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side....
- ADA Sign Depot Exit Sign with Tactile Text and Grade 2 Braille - 5" x 3"
-
A4.30.1 General
In building complexes where finding locations independently on a routine basis may be a necessity (for example, college campuses), tactile maps or prerecorded instructions can be very helpful...
-
A4.30.1 GENERAL
In building complexes where finding locations independently on a routine basis may be a necessity (for example, college campuses), tactile maps or prerecorded instructions can be very helpful...
-
Raised character and Braille exit signs
Raised character and Braille exit signs shall comply with Chapter 11A, Section 1143A or Chapter 11B, Sections 11B-703.1, 11B-703.2, 11B-703.3 and 11B-703.5. ETA Editor's Note...
-
SECTION 1011 EXIT SIGNS
SECTION 1011 EXIT SIGNS
-
SECTION 1013 EXIT SIGNS
[See subsections ...]