Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
Search Results "Raised Area"
Filters
Commonly Searched Documents
-
11B-703.2.1 Depth
-
703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
11B-703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
11B-703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
Public and Common Use Areas: ADA Standard Section 215.2
Section 215.2 covers scoping requirements in the current ADA Standards for fire alarm systems in public and common use areas.
-
1009.4.2 Area of refuge
The elevator shall be accessed from an area of refuge complying with Section 1009.6. Exceptions: Areas of refuge are not required at the elevator in open parking garages....
-
Emergency Communication: ADA Standard Section 407.4.9
Section 407.4.9: covers the current ADA Standards for the elevator emergency communication systems.
-
11B-406.1 General
Curb ramps, blended transitions and islands on accessible routes shall comply with Section 11B-406. Curb ramps may be perpendicular, parallel, or a combination of perpendicular and...
-
11B-406 Curb ramps, blended transitions and islands
[2010 ADA Standards] 406 Curb Ramps ETA Editor's Note The differences between 2010 ADA Standards Section 406 and CBC Section 11B-406 are numerous, as indicated by the...
-
11B-206.2.8 Employee work areas
Common use circulation paths within employee work areas shall comply with Section 11B-402. Exceptions: 1. Reserved. [2010 ADA Standards] 1....
-
4.7.11 ISLANDS
Any raised islands in crossings shall be cut through level with the street or have curb ramps at both sides and a level area at least 48 in (1220 mm) long in the part of the island intersected...
-
703.2.4 Character Proportions
703.2.4 Character Proportions. Characters shall be selected from fonts where the width of the uppercase letter "O" is 55 percent minimum and 110 percent maximum of the height of the...
-
703.2.4 Character Proportions
Characters shall be selected from fonts where the width of the uppercase letter "O" is 55 percent minimum and 110 percent maximum of the height of the uppercase letter "I". [ECTCR...
-
703.2.2 Case
703.2.2 Case. Characters shall be uppercase.
-
11B-703.2.2 Case
Characters shall be uppercase.
-
703.2.2 Case
Characters shall be uppercase.
-
11B-703.2.4 Character proportions
Characters shall be selected from fonts where the width of the uppercase letter “O” is 60 percent minimum and 110 percent maximum of the height of the uppercase letter “I”. [2010...
-
703.2.4 Character Proportions
Characters shall be selected from fonts where the width of the uppercase letter "O" is 55 percent minimum and 110 percent maximum of the height of the uppercase letter "I".
-
703.2.2 Case
Characters shall be uppercase.
-
11B-703.2.2 Case
11B-703.2.2 Case. Characters shall be uppercase.
-
11B-703.2.4 Character proportions
11B-703.2.4 Character proportions. Characters shall be selected from fonts where the width of the uppercase letter “O” is 60 percent minimum and 110 percent maximum of the height of...
-
11B-703.2.2 Case
Characters shall be uppercase.
-
11B-703.2.4 Character proportions
Characters shall be selected from fonts where the width of the uppercase letter “O” is 60 percent minimum and 110 percent maximum of the height of the uppercase letter “I”. [2010...