SECTION TITLE NOTES 11B-411.2.1.3.4 Position Clarifies requirements for sloping of screen and...
Search Results "Non-Positive Shut Off"
Filters
Commonly Searched Documents
-
11B-411.2.1.3.4 Position
-
11B-503.5 Vertical clearance
The minimum vertical clearance at designated passenger drop-off and loading zones, and along at least one vehicle access route to the area from site entrances and exits, is 114 inches....
-
A5
[ADA Standards § 4.6.6] Yes No If No, is there another area with a curb ramp and on an accessible route that could serve as the drop-off area?...
-
11B-233.3.1.2.2 Non-elevator buildings
Ground floor residential dwelling units in non-elevator buildings shall be adaptable....
-
§ 35.150(b)(2)(ii)(K) Shooting facilities with firing positions
(K) Shooting facilities with firing positions, sections 243 and 1010....
-
Audible Indicators: ADA Standard Section 407.4.8.2
Section 407.4.8.2 covers the current ADA Standards for audible elevator car indicators.
-
11B-407.4.8.2 Audible indicators
Audible indicators shall comply with Section 11B-407.4.8.2.
-
T102.3 Vehicle Length
The length of non-rail vehicles shall be measured from standard bumper to standard bumper....
-
M305.2.3 Fittings
requirement: Transfer supports shall not rotate within their fittings • Sub-Committee Recommendation: Transfer supports shall not rotate within their fittings, when in the use or latched position...
-
M304 Diagnostic Equipment Used by Patients in Standing Position
[See subsections ...]
-
M304 Diagnostic Equipment Used by Patients in Standing Position
[See subsections ...]
-
1. Transfer Surface
[See subsections ...]
-
5.4.2 Transfer Support Length for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
5.4.2 Transfer Support Length for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position....
-
M302 Diagnostic Equipment used by Patients in a Seated Position (Section-by-Section Analysis)
M302 in the final rule establishes the technical criteria for diagnostic equipment used by patients in a seated position such as examination chairs....
-
M305.3.1 Horizontal Position
Where the support is horizontal, the top of the gripping surface shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum above the standing surface. The gripping surface...
-
5.4.10 Transfer Support Fittings for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
5.4.10 Transfer Support Fittings for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position....
-
Transfer Surface (M301.2 and M302.2)
The transfer surface is the part of the diagnostic equipment onto which patients who use mobility devices or aids transfer when moving onto and off of the equipment (see defined terms in...
-
Braille Specifications
Section 703.3 provides specifications for braille, including the dimensions and position. Comment. Braille is to be located below the corresponding text....
-
5.4.4.2 Transfer Support Distance from Transfer Surface for Imaging Equipment
Supports (transfer or positioning) should be located 1 ½ inches maximum from the transfer surface....
-
M301.3.2 Stirrups
M301.3.2 Stirrups Proposed requirement: Where stirrups are provided, they shall provide a method of supporting, positioning, and securing the patient’s legs....
-
11B-206.2.1 Site arrival points
At least one accessible route shall be provided within the site from accessible parking spaces and accessible drop-off and passenger loading zones; public streets and sidewalks; and public...
-
Non-Circular Cross Section and Clearance (§505.5, §505.7)
Non-Circular Cross Section and Clearance Recommendation: Projecting objects above handrails can impact their usability....
-
Are fire extinguishers required to comply with the ADA Standards?
(However, non-discrimination provisions in regulations issued under the ADA may be pertinent to the usability of equipment and furnishings by people with disabilities.)...
-
505.7.2 Non-Circular Cross Sections
505.7.2 Non-Circular Cross Sections....