Specifications: Material: Cast Brass FASTENER: Wood Rail: 3 ea. #12 x 2 FH WS; 2 ea. #8 x 3/4 OH SMS Metal Rail: 3 ea. #12 x 2 FH WS; 2 ea. 8-32 x 3/4 OH SMS Ordering: ...
Search Results "Handrail Clearance"
-
Rockwood Manufacturing Company 702 Handrail Bracket
-
Where do I measure for a handrail extension?
Open the attached PDF file showing 3 conditions of handrail extensions and the variety of measuring points. Phrase 1. IN THE SAME DIRECTION: 505.10 Handrail Extensions....
-
Atlantis Railing
SPECIFICATIONS: Ramp Sections: The SunRailTM AccessEasy System is offered in a standard height of 42" with a handrail height of 36"....
-
Width: ADA Standard Section 306.2.5
Section 306.2.5 covers the current ADA Standards for toe clearance width.
-
Width: ADA Standard Section 306.3.5
Section 306.3.5 covers the current ADA Standards for knee clearance width.
-
Handrails
Handrails Pool stairs must have handrails with a minimum width between the rails of 20 inches and a maximum of 24 inches....
-
505 Handrails
Specifications for handrails in section 505 apply to those provided at ramps, stairs, and along walking surfaces....
-
505 Handrails
505 Handrails The 2010 Standards add a new technical requirement at section 406.3 for handrails along walking surfaces....
-
11B-306.2.4 Additional clearance
Space extending greater than 6 inches (152 mm) beyond the available knee clearance at 9 inches (229 mm) above the finish floor or ground shall not be considered toe clearance....
-
11B-306.2.4 Additional clearance
Space extending greater than 6 inches (152 mm) beyond the available knee clearance at 9 inches (229 mm) above the finish floor or ground shall not be considered toe clearance....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
R409 Handrails
R409 Handrails...
-
505 Handrails
505 Handrails...
-
Handrails
...are there handrails on both sides of the stair at a uniform height of 34"-38" above the front edge of the step?...
-
11B-505.2.1 Orientation
The orientation of at least one handrail shall be in the direction of the stair run, perpendicular to the direction of the stair nosing, and shall not reduce the minimum required width of...
-
11B-505.2.1 Orientation
The orientation of at least one handrail shall be in the direction of the stair run, perpendicular to the direction of the stair nosing, and shall not reduce the minimum required width of...
-
11B-505.2 Where required
Handrails shall be provided on both sides of stairs and ramps....
-
11B-505.2 Where required
Handrails shall be provided on both sides of stairs and ramps....
-
Handrails
Handrails Sloped entries must have handrails on both sides regardless of the slope. Handrail extensions are required at the top landing but not at the bottom....
-
Figure 505.10.3 Bottom Handrail Extension at Stairs – Drawing from the U.S. Access Board
-
Figure 505.10.2 Top Handrail Extension at Stairs – Drawing from the U.S. Access Board
-
Where Required: ADA Standard Section 505.2
Section 505.2 covers the current ADA Standards for where handrails are required.
