At least one of the active leaves of doorways with two leaves shall comply with Sections 11B-404.2.3 and 11B-404.2.4.
Search Results "Door Pull"
Filters
Commonly Searched Documents
-
11B-404.2.2 Double-leaf doors and gates
-
HEWI Polymide Pull Handles
Pull handles enable accessible ease of use for heavy external and fire compartment doors. They are designed to enable a variable gripping height from 75 to 120 cm....
-
11B-503.2 Vehicle pull-up space
Passenger drop-off and loading zones shall provide a vehicular pull-up space 96 inches (2438 mm) wide minimum and 20 feet (6096 mm) long minimum....
-
11B-503.2 Vehicle pull-up space
Passenger drop-off and loading zones shall provide a vehicular pull-up space 96 inches (2438 mm) wide minimum and 20 feet (6096 mm) long minimum. ...
-
11B-503.2 Vehicle pull-up space
Passenger drop-off and loading zones shall provide a vehicular pull-up space 96 inches (2438 mm) wide minimum and 20 feet (6096 mm) long minimum....
-
11B-404.2 Manual doors, doorways, and manual gates
Manual doors and doorways and manual gates intended for user passage shall comply with Section 11B-404.2....
-
11B-404.3 Automatic and power-assisted doors and gates
Automatic doors and automatic gates shall comply with Section 11B-404.3. Full-powered automatic doors shall comply with ANSI/BHMA A156.10....
-
11B-411.3 Elevator door requirements
Hoistway and car doors shall comply with Section 11B-411.3....
-
Clear Width: ADA Standard Section 404.2.3
Section 404.2.3 covers the current ADA Standards for clear width at manual doors, doorways and manual gates that are part of an accessible route.
-
11B-404.2.3 Clear width
Door openings shall provide a clear width of 32 inches (813 mm) minimum....
-
11B-407.3.4 Door and signal timing
The minimum acceptable time from notification that a car is answering a call until the doors of that car start to close shall be calculated from the following equation: T = D/(1.5 ft/...
-
4.13.11* DOOR OPENING FORCE
The maximum force for pushing or pulling open a door shall be as follows: (1) Fire doors shall have the minimum opening force allowable by the appropriate administrative authority....
-
Recessed Doors and Gates: ADA Standard Section 404.2.4.3
Section 404.2.4.3 covers the current ADA Standards for maneuvering clearances at recessed doors and gates.
-
General Partitions ADA Door Pull Kit (6300HC)
(2) Door pulls thru-bolted together through door....
-
11B-809.8.2 Door opening force
The opening force for primary entry exterior doors and secondary exterior doors shall be 8.5 pounds (38 N) maximum....
-
404.2.9 Door and Gate Opening Force
404.2.9 Door and Gate Opening Force. Fire doors shall have a minimum opening force allowable by the appropriate administrative authority....
-
Figure 404.2.4.1(a) Maneuvering Clearances at Manual Swinging Doors and Gates: Front Approach, Pull Side – Drawing from the U.S. Access Board
-
Hager Companies Round Pull 10
Round Pull Door Pull Materials: - Aluminum, brass, bronze, stainless steel Certification: - Meets ANSI A156.6 for J401 Pulls...
-
C. Doors
Doors - Examine each of the interior routes described above: ...with the exception of doors at shallow closets, do the doors to required accessible spaces, and all doors into and within...
-
Hager Companies Rectangular Wrought Door Pull 2
Rectangular Wrought Door Pull Materials: - Aluminum, brass, bronze, stainless steel Accessible: - 2-1/2" (64 mm) Clearance available on special order....
-
Hager Companies Cast Pull 7N
Cast Door Pull Materials: - Aluminum, Brass, Bronze Options: - May be combined with a plate to make a pull plate Certification: - Meets ANSI A156.6 for J401 Pulls...
-
Revolving Doors, Gates, and Turnstiles: ADA Standard Section 404.2.1
Section 404.2.1 covers the current ADA Standards for revolving doors, gates, and turnstiles that are part of an accessible route.
-
Hager Companies Cast Pull P8N
Cast Door Pull Materials: - Brass Certification: - Meets ANSI A156.6 for J401 Pulls...
-
Hager Companies Cast Pull 5N
Cast Door Pull Materials: - Aluminum, brass, bronze, stainless steel Options: - May be combined with a plate to make a pull plate Certification: - Meets ANSI A156.6 for J401 Pulls...
