Three Knuckle - Half Surface Swing Clear Hinge AB7534 - Concealed Anti-Friction Bearing - Heavy Weight Description: - ANSI A8421 - Beveled surface leaves - Non-rising removable...
Search Results "Door Clear Width"
Filters
Commonly Searched Documents
-
Hager Companies Three Knuckle - Half Surface Swing Clear Hinge AB7534
-
Clear Width [1016.3]
The clear width of ORARs must be a minimum of 36 inches....
-
§ 38.93(a)(1)
(1) At least one door on each side of the car from which passengers board opening onto station platforms and at least one adjacent doorway into the passenger coach compartment, if provided...
-
11B-502.7.2 Wheel stops
A curb or wheel stop shall be provided if required to prevent encroachment of vehicles over the required clear width of adjacent accessible routes....
-
4.2.1* Wheelchair Passage Width
The minimum clear width for single wheelchair passage shall be 32 in (815 mm) at a point and 36 in (915 mm) continuously (see Fig. 1 and 24(e))....
-
4.2.1* WHEELCHAIR PASSAGE WIDTH
The minimum clear width for single wheelchair passage shall be 32 in (815 mm) at a point and 36 in (915 mm) continuously (see Fig. 1 and 24(e))....
-
11B-809.9.2 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, work surface or the face of any appliance (excluding handles and controls) and the opposing cabinet, work surface,...
-
Width [4.3.3.] and Passing Space [4.3.4]
A continuous minimum clear width of 36 inches is required for accessible routes, but a reduction to 32 inches is allowed for a linear distance of no more than 24 inches (e.g., a doorway)...
-
307.5 Required Clear Width
Protruding objects shall not reduce the clear width required for accessible routes....
-
307.5 Required Clear Width
Protruding objects shall not reduce the clear width required for accessible routes....
-
1017.3 Clear Tread Width
The clear tread width of trails shall be 36 inches (915 mm) minimum....
-
1017.3 Clear Tread Width
The clear tread width of trails shall be 36 inches (915 mm) minimum....
-
11B-1008.2.4 Clear width
Accessible routes connecting play components shall provide a clear width complying with Section 11B-1008.2.4....
-
11B-1008.2.4 Clear width
Accessible routes connecting play components shall provide a clear width complying with Section 11B-1008.2.4....
-
11B-1008.2.4 Clear width
Accessible routes connecting play components shall provide a clear width complying with Section 11B-1008.2.4....
-
Inclusion Solutions Offset Door Hinge
These special hinges are designed to swing the door clear of the opening, adding about 2" additional clearance for wheelchairs and walkers....
-
1018.4 Clear Width
This section requires the clear width of beach access routes to be 60 inches minimum to enable individuals who use wheeled mobility devices to pass beach visitors traveling in the opposite...
-
1006.3.1 Clear Width
1006.3.1 Clear Width. The clear width of golf car passages shall be 48 inches (1220 mm) minimum....
-
Figure 404.2.3 Clear Width of Doorways – Drawing from the U.S. Access Board
-
Measuring Door Openings
Special care is needed when measuring the clear opening of a doorway. To measure the clear opening of a standard hinged door, open the door to 90 degrees....
-
(1)(e)
(e) Doorways on the end of the enclosure, opposite the water closet, should have a minimum clear opening width of 32 inches (815 mm)....
-
ElectionSource Voter Accessibility Expansion Door Hinge
Add 2'' of width to any doorway in your offices! Excellent for use on bathroom doors which are usually a tight fit for those in wheelchairs....
-
Accessible Pathway & Corridor: Minimum Clear Width Required for 90-degree Turn
The bold dashed line in the table and figure indicates the current ADA-ABA requirement of a 91.5 cm (36 in.) passage width....
-
Doorways
In transient lodging facilities, doors and doorways in inaccessible guest rooms are required to be at least 32 inches wide (224.1.2)....
