The rise for any ramp run shall be 30 inches (762 mm) maximum....
Search Results "Bus Ramp"
Filters
Commonly Searched Documents
-
11B-405.6 Rise
-
209.2.3 On-Street Bus Stops
209.2.3 On-Street Bus Stops. On-street bus stops shall comply with 810.2 to the maximum extent practicable....
-
11B-405.7.2 Width
The landing clear width shall be at least as wide as the widest ramp run leading to the landing....
-
810.2.3 Connection
Bus stop boarding and alighting areas shall be connected to streets, sidewalks, or pedestrian paths by an accessible route complying with 402....
-
810.2.3 Connection
Bus stop boarding and alighting areas shall be connected to streets, sidewalks, or pedestrian paths by an accessible route complying with 402....
-
T302.3 Openings
Ramp and bridgeplate surfaces shall be permitted to have one opening 1½ inches (38 mm) maximum in width and 4½ inches (115 mm) maximum in length to allow the operator to grasp the ramp or...
-
810.2.3 Connection
Bus stop boarding and alighting areas shall be connected to streets, sidewalks, or pedestrian paths by an accessible route complying with 402....
-
810.2.2 Dimensions--Modification to 810.2.2 of Appendix D to 36 CFR Part 1191
810.2.2 Dimensions--Modification to 810.2.2 of Appendix D to 36 CFR Part 1191 Bus boarding and alighting areas shall provide a clear length of 96 inches (2440 mm), measured perpendicular...
-
EZ-ACCESS GATEWAY™ Solid Surface Portable Ramp
The Gateway™ Solid Surface Portable Ramp – the 1-piece design means no assembly or moveable parts; just set the ramp in the desired position, and it’s ready to use....
-
§ 38.159(c)(8) Handrails
to grasp them from outside the vehicle while starting to board, and to continue to use them throughout the boarding process, and shall have the top between 30 inches (760 mm) above the ramp...
-
SECTION 1012 RAMPS
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for...
-
405 Ramps
Section 405 provides technical criteria for ramps....
-
F209.2.3 On-Street Bus Stops
On-street bus stops shall comply with 810.2 to the maximum extent practicable....
-
209.2.3 On-Street Bus Stops
On-street bus stops shall comply with 810.2 to the maximum extent practicable....
-
10.2.2 Bus Stop Siting and Alterations
[See subsections ...]
-
11B-406.5.10 Diagonal curb ramps
Diagonal or corner type curb ramps are perpendicular or parallel curb ramps that are oriented diagonally at an intersection....
-
Ramps [4.8]
Where the running slope of an accessible route is more than 5%, it is considered a ramp. Generally, changes in level up to 6 inches can be treated as a curb ramp....
-
T404 Level Boarding and Alighting
[See subsections ...]
-
9. Exterior Ramps
9. ...do the exterior ramps have the following features: a. top and bottom landings that are level, at least as wide as the ramp they serve, and at least 60" long to allow for adequate...
-
§ 37.3 Bus
Bus means any of several types of self-propelled vehicles, generally rubber-tired, intended for use on city streets, highways, and busways, including but not limited to minibuses, forty-...
-
Doorways: ADA Standard Section 405.7.5
Section 405.7.5 covers the current ADA Standards for doorway maneuvering clearance at ramp landings.
-
11B-209.2.3 On-street bus stops
On-street bus stops shall comply with Section 11B-810.2 to the maximum extent practicable....
-
11B-209.2.3 On-street bus stops
On-street bus stops shall comply with Section 11B-810.2 to the maximum extent practicable....
-
11B-209.2.3 On-street bus stops
On-street bus stops shall comply with Section 11B-810.2 to the maximum extent practicable....
