The side wall grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with...
Search Results "Bathtub Grab Bar"
-
11B-604.5.1 Side wall
-
4.16.4* Grab Bars
Grab bars for water closets not located in stalls shall comply with 4.26 and Fig. 29. The grab bar behind the water closet shall be 36 in (915 mm) minimum....
-
11B-609.9 Alternate configuration
L-shaped or U-shaped grab bars shall be permitted....
-
11B-609.9 Alternate configuration
L-shaped or U-shaped grab bars shall be permitted....
-
Grab Bars
Grab Bars A grab bar must be provided on at least one side of each step and on the transfer platform (shown on page 16), or as a continuous grab bar serving each step and the platform...
-
Grab Bars
Grab Bars Transfer walls must have at least one grab bar....
-
Bobrick 30" Straight Grab Bar B-6806 x 30
30" (760mm) long, 1-1/2" (38mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Bobrick 30" Straight Grab Bar B-5806 x 30
30" (760mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Grab Bars
Specifications for grab bars are addressed in section 604.5. Grab bars are required on one side wall and the rear wall....
-
11B-604.8.1.5 Grab bars
Grab bars shall comply with Section 11B-609. A side-wall grab bar complying with Section 11B-604.5.1 shall be provided and shall be located on the wall closest to the water closet....
-
Bobrick 30" Straight Grab Bar Peened B-5806.99 x 30
30" (760mm) long, 1-1/4" (32mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...
-
Bobrick 30" Straight Grab Bar Peened B-6806.99 x 30
30" (760mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...
-
11B-604.8.1.5 Grab bars
11B-604.8.1.5 Grab bars. Grab bars shall comply with Section 11B-609....
-
11B-604.8.1.5 Grab bars
Grab bars shall comply with Section 11B-609. A side-wall grab bar complying with Section 11B-604.5.1 shall be provided and shall be located on the wall closest to the water closet....
-
4.16.4* GRAB BARS
Grab bars for water closets not located in stalls shall comply with Fig. 29 and 4.26....
-
Murdock Manufacturing Grab Bars
Grab bar is 1-1/2 inch (3.81 cm) diameter satin finish stainless steel and have 1-1/2 inch (3.81 cm) clearance to wall....
-
AJW Architectural Products US130-A Series US130-A12 12" Exposed Flange, 1.5" Diameter Security Grab Bar - Configuration A
Grab bars must be installed properly to support the loads intended....
-
Grainger Anti Ligature Grab Bar, SS, 30 In
Technical Specs Item: Antiligature Grab Bar Material: Stainless Steel Finish: Stainless Steel Color: Silver Length (In.): 30 Height...
-
E. Grab Bars
Does each accessible toilet have a horizontal grab bar on the adjacent side wall that is at least 40" long and between 33"-36" above the floor for stabilization and assistance during transfer...
-
F. Grab Bars
Does each accessible toilet have a horizontal grab bar on the wall behind the toilet that is at least 36" long and between 33"-36" above the floor for stabilization and assistance during...
-
1009.4.5 Grab Bars
1009.4.5 Grab Bars. At least one grab bar complying with 609 shall be provided on the transfer wall....
-
1009.4.5 Grab Bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
1009.5.7 Grab Bars
1009.5.7 Grab Bars....
-
4. Grab Bars
Does the toilet in each accessible guestroom bathroom have a horizontal grab bar along the adjacent side wall that is at least 42" long and mounted 33"-36" above the floor for stabilization...
