Although people who have disabilities refer to themselves in many different ways and numerous "buzz words" have been used to describe people with disabilities over the years, direction for...
Search Results "Direct Threat"
2010 ADA Definition
Direct Threat: Direct threat means a significant risk to the health or safety of others that cannot be eliminated by a modification of policies, practices, or procedures, or by the provision of auxiliary aids or services, as provided in § 36.208 [2010 ADA Title III Regulations].
Filters
Commonly Searched Documents
-
What Terminology Should Be Used?
-
2.2.3 Receivers
Many BTE hearing aids can accept a direct audio input (DAI) from an FM (or IR) receiver through a wire connector....
-
2.2.3 Functional Reach
Reaches and lifts were completed in 15 different directions (3 different angles of asymmetry from the orientation of the WhMD at 5 different heights)....
-
Sweep Width
Hence, the AASHTO values of 1.2 m (4 ft) for bike lanes and 3 m (10 ft) for a two-way shared use path accommodates most users traveling single-file in opposite directions to pass each other...
-
Parking
Temporary sign providing direction to the area for van-accessible parking...
-
Shower and Sauna Doors in Transient Lodging Facilities
Congress directed this requirement to be included so that individuals with disabilities could visit guests in other rooms. See H. Rept. 101‒485, pt. 2, at 118 (1990); S....
-
Section E: Route from Entrance
(§404.2.4) E13 Is the area in front of each door level, with slopes no greater than 1:48 in all directions?...
-
Scoping Requirements
Scoping requirements for signs in section 216 cover room designations, which are required to be tactile, and directional and informational signs which are not required to be tactile but...
-
Issue 14: Inspection of contractor’s work - Beware of field changes!
The APS to cross the street that is on the right in Figure 18 is not located according to the plans and the arrow points to the curb ramp, rather than being aligned with the direction of...
-
Accessible Sports Facilities
Questions regarding operational issues should be directed to the Department of Justice, 1-800-514-0301 or 1-800-514-0383 (TTY)....
-
What other surface considerations affect wheelchair travel?
Exterior ramps and walks will generally be constructed with a cross-slope (perpendicular to the direction-of-travel slope) in order to provide positive drainage....
-
Passing Spaces [1016.4]
When passing spaces and resting intervals overlap, the technical requirements for resting intervals apply and the slope of the surface must be no steeper than 1:48 (2 percent) in any direction...
-
Key Study findings:
A standard turning area of 60 inches by 60 inches accommodated between 52% to 66% of the participants depending on the type of transfer (with or without grab bars and backrest) and direction...
-
Instructions
Questions concerning this publication, requests for free copies of this publication or copies of the ADA Standards, and general or technical questions about ADA requirements should be directed...
-
Service animal access to areas of a public accommodation. (Section-by-Section Analysis)
Zoonotic diseases can be transmitted to humans through bites, scratches, direct contact, arthropod vectors, or aerosols....
-
Introduction
Forest Service direction is to integrate accessibility from the start of each project....
-
P. MAINTENANCE OF ACCESSIBLE FEATURES AND TRAINING
Within one (1) year of the entry of this Consent Decree and annually thereafter, after approval of the training program by the United States, all County employees who have direct contact...
-
6. RECEIVERS AND COUPLERS: RECOMMENDATIONS
This will permit the use of stereo earphones, direct audio input (DAI) cables, neckloops, cochlear implant patch cords, and silhouette inductors....
-
ADA+ Facilities Compliance Services
individuals with disabilities, provide analysis and offer possible solutions Review in-house surveys and provide comments Determine location and text for informational and directional...
-
1017.4 Passing Spaces
Where passing spaces and resting intervals overlap, the technical requirements for resting intervals in 1017.8.3 require the slope of the surface to not be steeper than 1:48 in any direction...
-
1.1.4 Walk cross slope
Measure for overall cross slope (the direction perpendicular to the running slope) by establishing elevations at the outside edges of the walking surface at 10 ft (3 m) intervals beginning...
-
P. MAINTENANCE OF ACCESSIBLE FEATURES AND TRAINING
Within one (1) year of the entry of this Consent Decree and annually thereafter, after approval of the training program by the United States, all County employees who have direct contact...
-
Section 37.93 One Car Per Train Rule
Section 37.93 One Car Per Train Rule This section implements the statutory directive that all rail operators (light, rapid, commuter and intercity) have at least one car per train accessible...
-
11B-406.5.3 Landings
The slope of the landing in all directions shall be 1:48 maximum. [2010 ADA Standards] 406.4 Landings. Landings shall be provided at the tops of curb ramps....