New cars operating in existing stations may have a floor height within plus or minus 11/2 inches of the platform height....
Search Results "Transfer Surface Height"
-
§ 38.113(d)(2) Exception
-
606.5 Exposed Pipes and Surfaces
There shall be no sharp or abrasive surfaces under lavatories and sinks. [ECTCR UFAS 4.19.4, 4.24.6, 4.34.6.5(8)]...
-
17. Can broken or older ground level play components be replaced without changing the surface?
Can broken or older ground level play components be replaced without changing the surface? Yes....
-
4.30.6 Mounting Location and Height
4.30.6 Mounting Location and Height. Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
Clear Deck Space
Clear Deck Space Clear deck space of 60 by 60 inches minimum, with a slope of not more than 1:48, must be provided at the base of a transfer wall....
-
Stable
A surface is not permanently affected by expected weather conditions and can sustain normal wear and tear from the expected use(s) of the area, between planned maintenance....
-
M305.2.7 Clearance
Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum....
-
Shower
Although not a transfer issue, lowered sidewalls were intended to facilitate assisted showering....
-
Data Collection Procedures
study surfaces. ...
-
Parallel Grab Bars
With respect to the lower grab bar at bathtubs, the specified mounting height has been changed to a range of 8 inches minimum to 10 inches maximum above the rim of the bathtub....
-
11B-606.5 Exposed pipes and surfaces
11B-606.5 Exposed pipes and surfaces. Water supply and drain pipes under lavatories and sinks shall be insulated or otherwise configured to protect against contact....
-
Tile Tech Pavers® IPE Deck Tiles
When this kind of tiling is set up on your deck, they can create a continuous intertwining design on the surface....
-
Installation
PIP was exclusively installed by contractors specializing in the surface material. ...
-
2) Where the Standard says "Changes in level are not permitted"
permitted", such as 304.2 for turning spaces: Here the standard is followed by an unenforceable advisory that says, "As used in this section, the phrase ‘changes in level’ refers to surfaces...
-
1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (865 mm) maximum above the ground or deck surface....
-
1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (865 mm) maximum above the ground or deck surface....
-
M305.2.7 Clearance (Section-by-Section Analysis)
surface....
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
Hager Companies Door Protection Plate 198S
Door Protection Plate 198S 0.038" gauge stainless steel Materials: - Stainless Steel
-
Hager Companies Door Protection Plate 194S
Door Protection Plate 194S 0.050" gauge with 4-sided bevel Materials: - Aluminum, Brass, Bronze, Stainless Steel
-
Hager Companies Door Protection Plate 220S
Door Protection Plate 220S 0.062" gauge with no bevel Materials: - Aluminum, brass, bronze, stainless steel Options: - Self-adhesive tape available on all plates -...
-
Hager Companies Door Protection Plate 190S
Door Protection Plate 190S 0.050" gauge with no bevel Options: - UL listed for US32 and US32D with screw fasteners (must specify UL stamp) - Self-adhesive tape available...
