Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided...
Search Results "NFSI: National Floor Safety Institute"
-
11B-703.4.2 Location
-
11B-703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided...
-
Pilot Rock BPR2 Bear Resistant Trash and Recycling Receptacle
The hatch edge is vinyl trimmed for safety and provides a more weather tight seal. The spring loaded trigger release for hatch is covered to limit access to human fingers only....
-
20. Q: What about holding cells and jails that are not accessible?
Structural changes can be undertaken in a manner that ensures officer safety and general security....
-
Inpro Corporation JointMaster® DR Series Seal Expansion Joint Systems
The DR series compression seal stands up to any challenge due to an installation process that is not weather sensitive. Features & Benefits: Heavy pedestrian / Heavy...
-
12.2 Q. What happens if a builder deliberately manipulates the grade so that a second story, which also might have been treated as a ground floor, requires steps?
Deliberate manipulation of the height of the finished floor level to avoid the requirements of the Fair Housing Act would serve as a basis for the Department to determine that there is reasonable...
-
CalCasp Training: Overview of Federal Access Laws & Regulations
From CalCasp, this is a just-in-time training module: Description This course is an overview and history of Federal access laws and regulations. Including ANSI, the Civil...
-
4.1.3 Wheelchair Seating Space
Clear floor or ground space that is at least 30 inches by 48 inches shall be provided at each seating space that is required to be accessible and positioned for a forward approach to the...
-
National Network of ADA Centers
National Network of ADA Centers National Network of ADA Centers, Minority Report- Transfer Heights....
-
1(2)(a)(ii) Site analysis test
(B) To determine the practicality of providing accessibility to planned multifamily dwellings based on the topography of the existing natural terrain, the minimum percentage of ground floor...
-
Problem One (Voting Area)
Problem One: The voting area is in a small room and the accessible voting machine is only two feet from the check-in table. Solution: Relocate the voting area to a larger space...
-
1134A.8, Item 4
4. Knee and toe space. Knee and toe space shall be provided by one of the following:
-
3.4.7 Openings
Openings in the clear ground space and turning space surface shall not allow passage of a sphere more than 1/2 inch (13 mm) diameter. Where possible, elongated openings should be...
-
5.1.7 Surface
The surface of the clear ground space shall be firm and stable.
-
1134A.8, Item 4
4. Knee and toe space. Knee and toe space shall be provided by one of the following:
-
Pilot Rock BPR1 Bear Resistant Trash Receptacle
The hatch edge is vinyl trimmed for safety and provides a more weather tight seal. The spring loaded trigger release for hatch is covered to limit access to human fingers only....
-
Inpro Corporation JointMaster® AR Series Seal Expansion Joint Systems
Requires the Premium User plan or above. (Login or upgrade your account!) -
Inpro Corporation JointMaster® DR Series Seal Expansion Joint Systems
Requires the Premium User plan or above. (Login or upgrade your account!) -
1008.2.6 Ground Surfaces
Ground surfaces on accessible routes, clear floor or ground spaces, and turning spaces shall comply with 1008.2.6. Advisory 1008.2.6 Ground Surfaces....
-
Alterations and water closet clearances in single-user toilet rooms with in-swinging doors. (Section-by-Section Analysis)
The 1991 Standards do not allow an in-swinging door in a toilet or bathing room to overlap the required clear floor space at any accessible fixture....
-
ADA Standards for Accessible Design Pocket Guide: ADA Standard Section 2010
The complete guide to the 2010 ADA Standards for Accessible Design with notes provided by national accessibility experts Evan Terry Associates
-
1023.9 Stairway identification signs
A sign shall be provided at each floor landing in an interior exit stairway and ramp connecting more than three stories designating the floor level, the terminus of the top and bottom of...
-
702.5 Institute of Electrical and Electronics Engineers (IEEE)
Copies of the referenced standard may be obtained from the Institute of Electrical and Electronics Engineers, 10662 Los Vaqueros Circle, P.O....
