Alcoves shall be 36 inches (915 mm) wide minimum where the depth exceeds 24 inches (610 mm).
Search Results "Ground Surface"
Commonly Searched Documents
- 
    
  
  305.7.1 Forward Approach
  
 - 
    
  
  240.2 Play Components
  
Where provided, play components shall comply with 240.2.
 - 
    
  
  240.2 Play Components
  
240.2 Play Components. Where provided, play components shall comply with 240.2.
 - 
    
  
  11B-305.7.1 Forward approach
  
Alcoves shall be 36 inches (914 mm) wide minimum where the depth exceeds 24 inches (610 mm). FIGURE 11B-305.7.1 MANEUVERING CLEARANCE IN AN ALCOVE, FORWARD APPROACH
 - 
    
  
  305.7.2 Parallel Approach
  
305.7.2 Parallel Approach. Alcoves shall be 60 inches (1525 mm) wide minimum where the depth exceeds 15 inches (380 mm). Figure 305.7.2 Maneuvering Clearance in an Alcove,...
 - 
    
  
  305.7.1 Forward Approach
  
Alcoves shall be 36 inches (915 mm)wide minimum where the depth exceeds 24 inches (610 mm).
 - 
    
  
  305.7.2 Parallel Approach
  
Alcoves shall be 60 inches (1525 mm) wide minimum where the depth exceeds 15 inches (380 mm).
 - 
    
  
  11B-305.7.1 Forward approach
  
Alcoves shall be 36 inches (914 mm) wide minimum where the depth exceeds 24 inches (610 mm).
 - 
    
  
  11B-305.7.2 Parallel approach
  
Alcoves shall be 60 inches (1524 mm) wide minimum where the depth exceeds 15 inches (381 mm).
 - 
    
  
  11B-240.2 Play components
  
Where provided, play components shall comply with Section 11B-240.2.
 - 
    
  
  11B-305.7.1 Forward approach
  
Alcoves shall be 36 inches (914 mm) wide minimum where the depth exceeds 24 inches (610 mm).
 - 
    
  
  11B-305.7.2 Parallel approach
  
Alcoves shall be 60 inches (1524 mm) wide minimum where the depth exceeds 15 inches (381 mm).
 - 
    
  
  11B-240.2 Play components
  
Where provided, play components shall comply with Section 11B-240.2.
 - Smith System Husky Clover Activity Table
 - 
    
  
  4.7.5 Openings
  
Openings in surface of the clear floor or ground spaces required by section 2.0 shall not allow passage of a sphere more than 1/2 inch (13 mm) in diameter....
 - 
    
  
  Resting Intervals on Trails
  
, fiberglass, or other manufactured material), it’s more difficult to ensure drainage on natural or gravel surfaces....
 - 
    
  
  Cross Slope
  
Comment. Comments indicated that specifications for cross slope (1:48 maximum) are not referenced in the curb ramp section. Response. In the final rule, the Board has clarified...
 - 
    
  
  1011.4.1 Height
  
The tops of picnic tables shall comply with 902.3.
 - 
    
  
  Medical Diagnostic Equipment Accessibility Standards Sub-Committee Recommendations Imaging Equipment
  
Accessibility Standards for Medical Diagnostic Equipment Medical Diagnostic Equipment Accessibility Standards Sub-Committee Recommendations - Imaging Equipment Final...
 - 
    
  
  Handrails
  
...are there handrails on both sides of the stair at a uniform height of 34"-38" above the front edge of the step? [ADA Stds. 4.9] Yes __ No __ N/A __ Comments:...
 - 
    
  
  A5.  Accessible Parking Spaces
  
A5. Are all accessible parking spaces, including the access aisle, relatively level (1:50 or 2%) in all directions? [ADA Stds 4.6.3] If No: Look for a nearby area that is relatively...
 - 
    
  
  1011.4.1 Height
  
The tops of picnic tables shall comply with 902.3.
 - 
    
  
  1.2.3 Landings
  
1.2.3 Landings. Both measurements of ramp landings as described in Section 1.1.15 should not exceed a plus tolerance of 0.5%.
 - 
    
  
  1.2.7
  
1.2.7 When local variations (flatness) for cross slope of ramps are measured according to 1.1.14 at least 80% (rounded to the nearest whole number) should not exceed a 2% slope. The...