The tops of picnic tables shall comply with 902.3.
Search Results "Recreational Surfacing"
Filters
Commonly Searched Documents
-
1011.4.1 Height
-
1.2.3 Landings
1.2.3 Landings. Both measurements of ramp landings as described in Section 1.1.15 should not exceed a plus tolerance of 0.5%.
-
1.2.7
1.2.7 When local variations (flatness) for cross slope of ramps are measured according to 1.1.14 at least 80% (rounded to the nearest whole number) should not exceed a 2% slope. The...
-
National Floor Safety Institute (NFSI)
Founded in 1997 the National Floor Safety Institute (NFSI) is a 501(c)(3) non-for-profit organization whose mission is: “to aid in the prevention of slips, trips, and falls through...
-
5.4.4.1 Transfer Support Distance from Transfer Surface Recommendation for Stretchers
surface on the opposite side of the transfer....
-
5.1.2 Transfer Surface High Height Recommendations for M301 and M302
5.1.2 Transfer Surface High Height Recommendations for M301 and M302 The Committee recommends an adjustable height range with an upper height measuring at least 25 inches....
-
AccessRec GrassProtecta Slip Resistant Grass Reinforcement Mesh
Access Mat GRASSPROTECTA® by AccessRec, LLC. slip resistant grass reinforcement mesh is an improved lightweight heavy duty thick polyethylene grid for reinforcing and protecting grassed surfaces...
-
Diversified Woodcrafts ADA Instructor's Desk 1214K-L-ADA
Features 1" black phenolic resin surface 72"W x 30"D x 34"H Constructed of solid oak and oak veneers Diversified Woodcrafts Inc. is SEFA compliant and MAS...
-
Smith System Trespa Planner Science Table 30″ Deep 11288
Its Trespa TopLab Plus work surface is designed for maximum durability and provides ample space for projects of all kinds. Supports up to 400 lbs....
-
5.2.1.4 Transfer Surface Size for Imaging Equipment
5.2.1.4 Transfer Surface Size for Imaging Equipment. The transfer surface should be 28 inches wide minimum and 21 inches deep minimum....
-
1133A.4, Item 2
A minimum linear length of 30 inches (762 mm) of countertop shall be provided for a work surface....
-
1133A.4, Item 2
A minimum linear length of 30 inches (762 mm) of countertop shall be provided for a work surface....
-
Use of the International Symbol of Accessibility and Other Signs
The Federal agency recreation reservation system (http://www.recreation.gov) contains accessibility information about campsites and picnic areas that are registered in the system, including...
-
Behavioral Safety Products #BF920 Suicide Resistant Attenda Desk
This unit is manufactured in the USA to ISO Quality Standards, and it’s slightly textured maintenance-free surface is stain resistant and easy to clean. ...
-
Precision Safe Sidewalks LLC Sidewalk Trip Hazard Repair Service
Our patented saw-cutting technology completely and cleanly removes trip hazards from sidewalks, virtually eliminating claims that result from trips and falls on uneven sidewalk. By...
-
Varidesk Pro Desk Series: the Pro Desk 60
Check out our short video review of Varidesk's only stand alone standing desk: the Pro Desk 60. There are 5 different series of sit to stand adjustable desk from Varidesk. In this...
-
Pro Desk Series Description - VARIDESK
Short demonstration of the Pro Desk 60 by Varidesk.
-
Humanscale's Float Height-Adjustable Table
Float, Humanscale's Height-Adjustable desk meets the demands of healthier office solutions
-
Steelcase Ology Series height-adjustable tables
This is an informational video of the Steelcase Ology Series height-adjustable tables. We are working now more than ever -- more than any other single task in our lives, including...
-
902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground.
-
902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground.
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground.
-
902.4.2 Height
902.4.2 Height. The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground.
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground.
