Arm rests, footrests, side rails, and stirrups are examples of obstructions....
Search Results "Rail Crossing"
-
M301.2.3 Transfer Sides
-
Lowes Gatehouse Custom Access Ramp System
This modular aluminum ramp substructure is designed to be finished with decking, railing and accessories available at Lowe’s....
-
Are curved or circular ramps allowed?
This includes most circular or curved ramps, unless the radius is large enough so that the cross slope is compliant and compound slopes are avoided....
-
12162(a)(4)(A)(ii)
Unless not practicable, a person providing intercity rail transportation shall place an accessible car adjacent to the end of a dining car described in clause (I) through which an individual...
-
Q5.) What dimensions and conditions can practitioners reasonably consider to be compliant when the conditions, as constructed, do not meet the technical requirements exactly and there are no official, published, industry-developed tolerances?
Without official guidance but based on an analysis of the capabilities of the materials and processes, David Ballast generally recommends a tolerance of 0.5% in the cross slope direction...
-
§ 1194.23(j)
(j) Products that transmit or conduct information or communication, shall pass through cross-manufacturer, non-proprietary, industry-standard codes, translation protocols, formats or other...
-
R305.2.4 Pedestrian Refuge Islands
The edges of cut-through pedestrian refuge islands can provide useful cues to the direction of the crossing....
-
1017.10 Trailhead Signs
trailheads to include information on the length of the trail or trail segment; surface type; typical and minimum tread width; typical and maximum running slope; and typical and maximum cross...
-
12148(b)(1) General rule
(1) General rule Subject to paragraph (2), with respect to 2 or more vehicles operated as a train by a light or rapid rail system, for purposes of section 12132 of this title and section...
-
NPRM and Comments
asked whether there should be any specific requirements for bus rapid transit (BRT) systems, which share some of the characteristics of fixed-route bus systems and some characteristics of rail...
-
Security Bollards [7.4] and Security Devices
Security Bollards [7.4] and Security Devices Bollards and rails used to keep shopping carts on the premises must allow an accessible clear passage (32 inches wide minimum) along at least...
-
3.4.3 Unrestricted Viewing Opportunities
Where there is a drop-off of more than 30 inches (762 mm) a guard railing or barrier that complies with the height and opening requirements of the International Building Code sections 1013.2...
-
§ 37.107(a)
entity which is primarily engaged in the business of transporting people and whose operations affect commerce, which makes a solicitation after February 25, 1992, to purchase or lease a new rail...
-
PUBLIC ENTITY
other instrumentality of a State or States or local government; and (3) The National Railroad Passenger Corporation, and any commuter authority (as defined in section 103(8) of the Rail...
-
PUBLIC ENTITY
other instrumentality of a State or States or local government; and (3) The National Railroad Passenger Corporation, and any commuter authority (as defined in section 103(8) of the Rail...
-
DORMA 8000 Series Exit Device
The touchbar, rail assembly and integral parts are constructed of solid steel. Devices are available for labeled and non-labeled openings....
-
Guldmann GH3 Lifting Module
The hoist is used in rail systems which are installed, tested and approved according to Guldmann’s stipulation....
-
NSS Questions and Concerns
Who is Red Cross accountable to in terms of the accuracy of the data?...
-
E103.4 508 Standards (Section-by-Section Analysis)
The term “508 Standards” is defined in order to provide consistent cross-reference within the standards to all chapters that apply to Section 508-covered federal entities, namely: 508 Chapters...
-
Managed Use
For example, a trail may be managed for both equestrian and hiker/pedestrian use in the summer and for cross-country skiing in the winter....
-
Original research for ANSI A117.1 (1957 - 1961)
Both slope and cross slope were measured. These guidelines for measurement were deleted from later versions of the standard....
-
Handrails [ADA Standards §504.6, §505]
Handrails can have circular or non-circular cross-sections. The gripping surface and adjacent surfaces must be free of abrasive or sharp elements....
-
Beach Access Routes
Beach access routes allow pedestrians to cross a beach so that they can play, swim, or participate in other beach- or water-related activities....
-
BEA Inc. PBJMS Series Jamb Push Plate (Push to Open)
The PBJMS Series is a practical solution to guide rail applications. The narrow body allows for a clean sleek look without the installation of a larger plate or bollard....
