For barrier-free installation, contractor shall provide ⅝" minimum recess for curb in sub floor. *ADA compliance when accessories installed by manufacturer....
Search Results "Raised Curb"
Commonly Searched Documents
- Florestone 35-62H Barrier-Free Shower
- Beneficial Designs Public Rights of Way Assessment Process (PROWAP)
- Spectrum Industries Inc. Freedom One eLift Lectern™ Adjustable Height Lecterns
-
308 Reach Ranges
Gas pumps are often located on curbs at least 6 inches high for safety reasons....
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
10.2.1(1)
are constructed at bus stops, bays or other areas where a lift or ramp is to be deployed, they shall have a firm, stable surface; a minimum clear length of 96 inches (measured from the curb...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-303.3 Beveled
Changes in level exceeding 1/2 inch (13 mm) must comply with Sections 11B-405 (Ramps) or 11B-406 (Curb Ramps). ◼ ...
-
Permanent Rooms and Spaces
These types of signs are required to be tactile through the provision of braille and raised characters....
-
4.10.14* Emergency Communications
It shall be identified by a raised symbol and lettering complying with 4.30 and located adjacent to the device....
-
Signs [ADA Standards §216, §703]
Tactile signs must include compliant raised characters and braille characters and be located at doors 48” to 60” above the floor or ground (§703.2)....
-
§ 38.159(b)(7) Platform gaps
Any openings between the platform surface and the raised barriers shall not exceed 5/8 inch (16 mm) in width....
-
1005.3 Edge Protection
In such a design, curbs or barriers are not required....
-
1005.3 Edge Protection
In such a design, curbs or barriers are not required....
-
Section 2. Accessible route
Exterior accessible routes may include parking access aisles, curb ramps, walks, ramps and lifts....
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
1005.3 Edge Protection
In such a design, curbs or barriers are not required....
-
§100.201 Accessible route
Exterior accessible routes may include parking access aisles, curb ramps, walks, ramps, and lifts....
-
Effect on Removal of Barriers in Existing Facilities: ADA Standard Section 101.2
Section 101.2 of the ADA Standards covers the effects of the removal of barriers in existing facilities.
-
Comments on specific provisions of proposed ADAAG (Preamble, Section-by-Section Analysis)
Strenuous objections were raised by some business commenters to the proposed provisions of the guidelines concerning check-out aisles, counters, and scoping for hotels and nursing facilities...
-
M307.2 Tactilely Discernible (Section-by-Section Analysis)
The most common method to ensure that buttons and similar controls are tactilely discernible is to raise part or all of the control surface above the surrounding surface and at a distance...
-
M101.5 Dimensions (Section-by-Section Analysis)
One commenter and the MDE Advisory Committee raised concerns about providing standards for obese patients and pediatric patients....