For barrier-free installation, contractor shall provide ⅝" minimum recess for curb in sub floor. *ADA compliance when accessories installed by manufacturer....
Search Results "Raised Curb"
Filters
Commonly Searched Documents
-
Florestone 35-62H Barrier-Free Shower
-
Beneficial Designs Public Rights of Way Assessment Process (PROWAP)
Our automated sidewalk assessment process focuses on four areas of liability: Tripping Hazards Curb Ramps Cross Slopes Critical Features When we...
-
Spectrum Industries Inc. Freedom One eLift Lectern™ Adjustable Height Lecterns
The whisper quiet electric lift mechanism raises the lectern from 28.5- to 42-inches in seconds, making it ergonomic, ADA compliant, and the right height for everyone....
-
308 Reach Ranges
Gas pumps are often located on curbs at least 6 inches high for safety reasons....
-
Permanent Rooms and Spaces
These types of signs are required to be tactile through the provision of braille and raised characters....
-
4.10.14* Emergency Communications
It shall be identified by a raised symbol and lettering complying with 4.30 and located adjacent to the device....
-
Signs [ADA Standards §216, §703]
Tactile signs must include compliant raised characters and braille characters and be located at doors 48” to 60” above the floor or ground (§703.2)....
-
§ 38.159(b)(7) Platform gaps
Any openings between the platform surface and the raised barriers shall not exceed 5/8 inch (16 mm) in width....
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
10.2.1(1)
are constructed at bus stops, bays or other areas where a lift or ramp is to be deployed, they shall have a firm, stable surface; a minimum clear length of 96 inches (measured from the curb...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-303.3 Beveled
Changes in level exceeding 1/2 inch (13 mm) must comply with Sections 11B-405 (Ramps) or 11B-406 (Curb Ramps). ◼ ...
-
Effect on Removal of Barriers in Existing Facilities: ADA Standard Section 101.2
Section 101.2 of the ADA Standards covers the effects of the removal of barriers in existing facilities.
-
Comments on specific provisions of proposed ADAAG (Preamble, Section-by-Section Analysis)
Strenuous objections were raised by some business commenters to the proposed provisions of the guidelines concerning check-out aisles, counters, and scoping for hotels and nursing facilities...
-
M307.2 Tactilely Discernible (Section-by-Section Analysis)
The most common method to ensure that buttons and similar controls are tactilely discernible is to raise part or all of the control surface above the surrounding surface and at a distance...
-
M101.5 Dimensions (Section-by-Section Analysis)
One commenter and the MDE Advisory Committee raised concerns about providing standards for obese patients and pediatric patients....
-
Signs
A, “ADA Standards for Accessible Design,” (Standards) § 4.1.3(16)(a): Raised and Braille letters or numbers (Standards § 4.30.4); Mounting location (§ 4.30.6); Color...
-
(a) Single-story dwelling units
Sunken or raised functional areas, such as a sunken living room, are also exempt from access specifications, provided that such areas do not interrupt the accessible route through the remainder...
-
11B-411.2.1.2.1 Keypads
The number five key shall have a single raised dot....
-
Employee for ADA Compliance
The designated employee(s) or consultant shall be knowledgeable about or receive training on the ADA, shall serve as the primary contact(s) on disability-related issues and concerns raised...
-
Employee for ADA Compliance
The designated employee(s) or consultant shall be knowledgeable about or receive training on the ADA, shall serve as the primary contact(s) on disability-related issues and concerns raised...
-
4.10.14* EMERGENCY COMMUNICATIONS
It shall be identified by a raised or recessed symbol and lettering complying with 4.30 and located adjacent to the device....
