Floor fire doors used to protect openings in fire-resistance-rated floors shall be tested in the horizontal position in accordance with ASTM E 119, and shall achieve a fire-resistance rating...
Search Results "Positioning Support"
-
711.4.6 Floor fire doors
-
11B-902.4.1 Clear floor or ground space
A clear floor space complying with Section 11B-305 positioned for forward approach shall be provided....
-
11B-804.6.2 Operable parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with Section 11B-309.3....
-
§ 38.83(b)(4) Power or equipment failure
Lift platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding any faster than 12 inches/second...
-
11B-902.4.1 Clear floor or ground space
A clear floor space complying with Section 11B-305 positioned for forward approach shall be provided....
-
American Specialties 9012 Surface Mounted Baby Changing Station
Unit shall comply with 2010 ADA Accessibility Standards and shall support a static load of 300 lbs. and be tested in excess of 350 lbs. Surface mounted....
-
PDQ XGT Series Cylindrical Lock
Locksets shall be listed by UL / ULC for ratings of “A” label (3 hours) and less, UL10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”....
-
[A] BUILDING
Any structure used or intended for supporting or sheltering any use or occupancy. Advisory Definition of BUILDING. ...
-
Information technology
The term information technology includes computers, ancillary equipment, software, firmware and similar procedures, services (including support services), and related resources....
-
[A] BUILDING
Any structure used or intended for supporting or sheltering any use or occupancy. Advisory Definition of BUILDING....
-
11B-403.6 Handrails
Handrails provided in elevator cabs and platform lifts, referred to as support rails in the California Building Code, are not required to comply with the requirements for handrails on walking...
-
BUILDING
Any structure utilized or intended for supporting or sheltering any occupancy. Advisory Definition of BUILDING....
-
F. Testing
We believe, however, that PSAPs should conduct an internal testing program in which they conduct random TTY test calls of each call-taking position....
-
Sloped Surfaces
This is the "level" position. While the level is in this position, measure the distance between the bottom end of the level and the sloped surface below....
-
Additional Transfer Techniques: Use of Stretchers and Gurneys
Other equipment may be located in spaces with no room at the end of the table making it impossible to position a portable floor lift....
-
Audio Induction Loop
Consistent and uniform coverage is sometimes difficult with wire loops (although not with 3-D mats), depending on the application and the relative position of the listener....
-
e. The terms of a collective bargaining agreement
However, like a position description, the agreement would be considered along with other evidence, such as the actual duties performed by people in these jobs....
-
12112(b)(6)
individual with a disability or a class of individuals with disabilities unless the standard, test or other selection criteria, as used by the covered entity, is shown to be job-related for the position...
-
1009.2.2 Seat Location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool....
-
902.4 Dining Surfaces and Work Surfaces for Children's Use
Dining surfaces and work surfaces that are used primarily by children 5 years and younger shall not be required to comply with 902.4 where a clear floor or ground space complying with 305 positioned...
-
7(2)(b)(i)
(i) Where the door swings into the bathroom, there is a clear space (approximately, 2' 6" by 4'0") within the room to position a wheelchair or other mobility aid clear of the path of the...
-
12112(b)(6)
individual with a disability or a class of individuals with disabilities unless the standard, test or other selection criteria, as used by the covered entity, is shown to be job-related for the position...
-
1009.2.4 Seat Height
lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised (load) position...
