Where an addition to an existing building results in an increase in the number of residential dwelling units, the requirements of 233.3.1.1 and 233.3.2.1 shall apply only to the residential...
Search Results "Existing Trail"
-
233.3.4 Additions, F233.3.3 Additions, F233.4.4 Additions
-
Alterations and Additions [F245.2.3]
When altering or adding picnic units to an existing picnic facility, the scoping requirements apply only to the picnic units that are altered or added until the required minimum number of...
-
Alterations [4.1.6(1)(f) & (k)]
The intended scope of work and technical feasibility are key factors in determining compliance in alterations to existing elevators....
-
TEST NO. 2 – SITE ANALYSIS TEST
The analysis of the existing slope (before grading) shall be done on a topographic survey with 2-foot (610 mm) contour intervals with slope determination made between each successive interval...
-
TEST NO. 2 – SITE ANALYSIS TEST
The analysis of the existing slope (before grading) shall be done on a topographic survey with 2-foot (610 mm) contour intervals with slope determination made between each successive interval...
-
D. Effective date
New pages on existing websites would need to comply with the Web access requirements to the maximum extent feasible....
-
Chapter 4: Hardware (Section-by-Section Analysis)
This chapter draws substantively from existing 508 Standards, as well as the technical requirements for automatic teller machines and fare machines in the ADA and ABA Accessibility Guidelines...
-
C103 Defined Terms (Section-by-Section Analysis)
Some of the definitions have been carried over in whole or in part from the existing 255 Guidelines, while others represent terms that are new to these guidelines....
-
907.5.2.3.3.1 Wired equipment.
The future extension of the existing wiring from the unit smoke alarm locations to required locations for visible appliances....
-
11B-411.2.2.1 Visible identification
Exception: Existing buildings shall be permitted to have a visible identification fixture with a car designation character adjacent to each elevator car entrance centered at 72 inches (1829...
-
11B-705.1.2.2.2.1 One entrance/exit point
Existing parallel curb ramps with detectable warnings in compliance with the code requirements in effect at the time of installation shall not be required to provide a minimum 36 inches...
-
11B-705.1.2.2.2.1 One entrance/exit point
Existing parallel curb ramps with detectable warnings in compliance with the code requirements in effect at the time of installation shall not be required to provide a minimum 36 inches...
-
11B-411.2.2.1 Visible identification
Exception: Existing buildings shall be permitted to have a visible identification fixture with a car designation character adjacent to each elevator car entrance centered at 72 inches (1829...
-
Car Dimensions and Doors: ADA Standard Section 408.4.1
Section 408.4.1 covers the current ADA Standards for the car dimensions and doors of limited-use/limited-application elevators.
- Watchdog The RELOCATOR Fire Alarm Pull Station
- ADA Solutions, Inc. Surface Applied Truncated Dome Detectable Warning Systems
- Varidesk LLC. Pro Desk 60™ Height-Adjustable Standing Desk
- Otis Elevator HANDSOFF Phone
- Inclusion Solutions BigBell™ Max Alert System
-
407.4.7.1.2 Location
EXCEPTION: Where space on an existing car operating panel precludes tactile markings to the left of the controls, markings shall be placed as near to the control as possible....
-
11B-404.2.8.1 Door closers and gate closers
[Safe Harbor only applies to existing primary entrances.]...
-
F245.4 Outdoor Recreation Access Routes
In alterations to existing picnic facilities, there are exceptions in 1016.1 that can be used where conditions specified in 1019 apply....
-
382.113 What services are carriers not required to provide to passengers with a disability on board the aircraft?
These sections are parallel to their counterparts in the existing rule....
-
F244.5 Outdoor Recreation Access Routes
In alterations to existing camping facilities, there are exceptions in 1016.1 that can be used where conditions specified in 1019 apply....