Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
Search Results "Stream Height"
-
11B-608.3 Grab bars
-
T504 Fare Collection Devices
A transit agency expressed concern that application of the requirements in this section, in conjunction with the maximum mounting height for operable parts specified in T304 (i.e., operable...
-
902 Dining Surfaces and Work Surfaces
Clear floor space is required for a forward approach (902.2), and a surface height of 28 to 34 inches is specified (902.3)....
-
Two Step Transfer Evaluation
Additionally, the study participants who made the two-step transfers appear more able on these transfers when comparing the heights achieved during the two-step transfers to the heights...
-
Fire Rings, Grills, Fireplaces, and Wood Stoves
The height requirements are based on the height for countertops and the minimum low forward reach range in ABAAS....
-
5.8.2 Knee and Toe Clearance Recommendations under Breast Platform Recommendations
Toe clearance shall be provided at a height of 9 inches above the floor to a depth of 6 inches maximum. M303.2.4.2 Knee Clearance....
-
Kohler® Mazz Single-Handle Pull-Down Sprayer Kitchen Faucet in Vibrant Stainless
spout and 360-degree spout rotation offer superior clearance for filling pots and cleaning 2-function pull-down spray head with touch-control allows you to switch between sweep spray and stream...
-
B7-b
[ADA Standards § 4.7.2] Yes No Note: 1:12 is one inch of vertical height for each 12 inches of length....
-
1132A.4.1, Item 2
Thresholds with a change in height between ¼ inch (6.35 mm) and ¾ inch (19.05 mm) shall be beveled with a slope no greater than 1 unit vertical in 2 units horizontal (50-percent slope)....
-
Service Counters
If we look at 11B-904.4.1, we see that a 36” minimum long section of the counter needs to be installed at 34” maximum height. ...
-
Re: Section 307 Protruding Objects
object hazard based solely on section 307, but so is the (code compliant) lavatory with its (required) 29" high front edge, and the 8" deep (code compliant) shelf mounted at the (required) height...
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
§ 1194.25(j)(3)
(3) Where any operable control is more than 10 inches and not more than 24 inches behind the reference plane, the height shall be 46 inches maximum and 15 inches minimum above the floor....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
T702.6 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
e-ii
[ADA Standards § 4.7.2] Yes No Note: 1:12 is one inch of vertical height for 12 inches of horizontal distance....
-
11B-703.5.8 Character spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
11B-203.6 Single occupant structures
Single occupant structures accessed only by passageways below grade or elevated above standard curb height, including but not limited to, toll booths that are accessed only by underground...
-
F203.7 Single Occupant Structures
Single occupant structures accessed only by passageways below grade or elevated above standard curb height, including but not limited to, toll booths that are accessed only by underground...
-
M303.3.3.1 Running Slope
EXCEPTION: A running slope not steeper than 1:8 shall be permitted for ramp runs with a maximum height of 2 ½ inches (64 mm)....
-
203.6 Single Occupant Structures
Single occupant structures accessed only by passageways below grade or elevated above standard curb height, including but not limited to, toll booths that are accessed only by underground...
-
1132A.4.1, Item 2
Thresholds with a change in height between ¼ inch (6.35 mm) and 3/4 inch (19.05 mm) shall be beveled with a slope no greater than 1 unit vertical in 2 units horizontal (50-percent slope)...
-
8.5 Stacks
Shelf height in stack areas is unrestricted (see Fig. 56)....
