A minimum of 50% of aisle seats, including all moveable or removable seats at wheelchair or mobility aide securement locations, shall have an armrest on the aisle side which can be raised...
Search Results "Raised Circulation Path"
Filters
Commonly Searched Documents
-
§ 38.161 Moveable aisle armrests
-
9.2* POST OFFICE LOBBIES
Avoid designs that call for, or may necessitate, non-fixed partitions in circulation routes of handicapped people....
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars raised...
-
I. Final
In the event that no objections to this Settlement Agreement are raised prior to or at the Fairness Hearing, that any objections that have been raised have been fully and formally withdrawn...
-
4.20.4 Grab Bars
Nonetheless, in both conditions, grab bars are located to help individuals get into the tub and then to lower and raise themselves to and from a seated position....
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars raised...
-
Cybex Total Access Treadmill
Features Raised Console Iconography and Color allows easy identification of the main controls both by color, large buttons and text for older users, plus raised iconography for visually...
-
Accessible Route
A continuous unobstructed path connecting all accessible elements and spaces of a building or facility....
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
1009.2.2 Seat Location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool....
-
1009.2.4 Seat Height
height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
Armedica Hi Lo Adult Changing Table from MAX-Ability
A great choice -- move it wherever you need it, then raise and lower for user and caregiver comfort. Tough upholstery over a soft padding, and you get to pick the color!...
-
11B-1009.2.2 Seat location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
-
11B-407.4.7.1.2 Location
Raised characters or symbols and Braille designations shall be placed immediately to the left of the control button to which the designations apply. Exception: Reserved....
-
Rotational Penetrometer Measurements of Firmness and Stability
While engineered wood fiber K (EWFK) became only slightly less stable, engineered wood fiber J (EWFJ) and path fines (PAFN) became much less stable....
-
1.1.14 Flatness of ramp cross slope
Because most exterior ramps will be 5 ft wide or less and the most common path of travel would be approximately in the middle of the path it seems reasonable to measure at the center of...
-
Takeform Fusion Signage Floor Directional Type B
Directional headers have raised copy. A slide-in printed insert enables the sign to be easily updated....
-
§ 36.403(a)(1)
that affects or could affect the usability of or access to an area of a facility that contains a primary function shall be made so as to ensure that, to the maximum extent feasible, the path...
-
Surprise Drills
., blocked paths or exits), forcing people to use alternative routes. Performance of these drills should also be evaluated and feedback given to all participants. ...
-
Seat Height
must be designed so that the seat will make a stop between a minimum of 16 inches and maximum of 19 inches (measured from the deck to the top of the seat surface, when the seat is in the raised...
-
Tactile letters
They also noted the quality of the raised letters was better for some words than others....
-
Fact Based Questions
Questions Participants identified answers correctly an average of 8% more frequently when presented with full round models than with bas-relief models, and 12% more frequently than with raised...
