Accessible Routes [§402] Components of accessible routes include walking surfaces, doorways, ramps, curb ramps, elevators, and, where permitted, platform lifts....
Search Results "Play Area Ramp"
-
Accessible Routes [§402]
-
405.7.3 Length
The landing clear length shall be 60 inches (1525 mm) long minimum.
-
11B-405.7.2.1
Top landings shall be 60 inches (1524 mm) wide minimum.
-
405.7.3 Length
The landing clear length shall be 60 inches (1525 mm) long minimum.
-
R407.6.3 Length
R407.6.3 Length. The landing clear length shall be 1.5 m (5.0 ft) long minimum.
-
405.7.3 Length
405.7.3 Length. The landing clear length shall be 60 inches (1525 mm) long minimum.
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum.
-
4.8.4(2)
(2) The landing length shall be a minimum of 60 in (1525 mm) clear.
-
11B-405.7.2.1
Top landings shall be 60 inches (1524 mm) wide minimum.
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum.
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum.
-
1.1.15 Flatness of ramp landings
1.1.15 Flatness of ramp landings. Measure ramp landings at the midpoints of each landing in each direction using a 24 - in (600 mm) digital inclinometer....
-
§ 35.151(b)(4)(ii)(A)
(A) An accessible path of travel may consist of walks and sidewalks, curb ramps and other interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors, rooms, and...
-
§ 35.151(b)(4)(ii)(A)
(A) An accessible path of travel may consist of walks and sidewalks, curb ramps and other interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors, rooms, and...
-
f-v
If a ramp is more than 30 feet long, is a level landing at least 60 inches long provided at every 30 feet of horizontal length?...
-
§ 38.125(c)(4) Ramp barriers
(4) Ramp barriers. Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
Beneficial Designs High Efficiency Trail Assessment Process (HETAP) Software 3.0 Wheeled Instrumentation Sensor Package for Data Collection
Key HETAP and UTAP Differences HETAP follows the same general principles as its predecessor, UTAP (the Universal Trail Assessment Process). Both collect objective trail...
-
Horizontal Dispersion: ADA Standard Section 221.2.3.1
Section 221.2.3.1 covers scoping requirements in the current ADA Standards for horizontal Dispersion in assembly areas.
-
Bus boarding and alighting areas, BRT vehicles and stops/stations
ADA standards apply to buses and bus boarding and alighting areas as well as BRT vehicles and stops/stations. (DOT ADA Regulation 49 C.F.R....
-
1007.2 Continuity and components
1007.2 Continuity and components. Each required accessible means of egress shall be continuous to a public way and shall consist of one or more of the following components:
-
1009.2 Continuity and components
Each required accessible means of egress shall be continuous to a public way and shall consist of one or more of the following components:
-
New Construction and Alterations
New Construction and Alterations DOJ’s title II ADA regulation provides that newly constructed or altered streets, roads, and highways must contain curb ramps or other sloped areas at...
-
402.2 Components
Accessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than 1:20, doorways, ramps, curb ramps excluding the flared...
-
11B-406.5 Common requirements
Curb ramps and blended transitions shall comply with Section 11B-406.5....
