Exception: In existing buildings, where the selling space is under 5000 square feet (465 m2) no more than one check-out aisle complying with Section 11B-904.3 shall be required....
Search Results "Clear Space"
Filters
Commonly Searched Documents
-
11B-227.2 Check-out aisles
-
11B-703.8.8 Line spacing
11B-703.8.8 Line spacing. Low resolution VMS characters shall comply with Section 11B-703.5.9....
-
11B-703.8.8 Line spacing
11B-703.8.8 Line spacing. Low resolution VMS characters shall comply with Section 11B-703.5.9....
-
304.1 General
Turning space shall comply with 304....
-
304.1 General
Turning space shall comply with 304....
-
304.1 General
Turning space shall comply with 304....
-
304.1 General
Turning space shall comply with 304....
-
7(1)(a)
(a) A clear floor space at least 30 inches by 48 inches that allows a parallel approach by a person in a wheelchair is provided at the range or cooktop and sink, and either a parallel or...
-
General [5.1]/ Access Aisles [5.3]
The required clear width (36 inches minimum) is specified for the clearance between the edges of fixed tables or between table edges and walls....
-
304.3 Size
Turning space shall comply with 304.3.1 or 304.3.2....
-
304.1 General
Turning space shall comply with 304....
-
11B-304.1 General
Turning space shall comply with Section 11B-304....
-
11B-304.1 General
Turning space shall comply with Section 11B-304....
-
11B-304.1 General
Turning space shall comply with Section 11B-304....
-
3. Sidewalk Width
3. ...is the usable width of sidewalks at least 36" wide to accommodate wheelchair travel, even if cars project over the curb onto the sidewalk? [ADA Stds. 4.3.3] Yes __ No __ N/A...
-
M303.2.3 Wheelchair Spaces / Depth of Wheelchair Spaces for front or Rear Entry
M303.2.3 Wheelchair Spaces / Depth of Wheelchair Spaces for front or Rear Entry • Sub-Committee Recommendation: The Sub-committee and Full Committee have decided not to act on the proposed...
-
Companion Seats: ADA Standard Section 1002.4.7
1345 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within the amusement ride, a companion seat shall be provided for each wheelchair space...
-
11B-1002.4.7 Companion seats
1346 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within the amusement ride, a companion seat shall be provided for each wheelchair space...
-
Maneuvering Space in Load and Unload Areas
Maneuvering Space in Load and Unload Areas....
-
2.6.1.1
A space 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum; or...
-
T215.2.2 Wheelchair Spaces
Wheelchair spaces shall be identified by the International Symbol of Accessibility complying with T703....
-
F221.2 Wheelchair Spaces
Wheelchair spaces complying with F221.2 shall be provided in assembly areas with fixed seating....
-
221.2 Wheelchair Spaces
Wheelchair spaces complying with 221.2 shall be provided in assembly areas with fixed seating....
-
11B-221.2.2 Integration
The requirement that wheelchair spaces be an "integral part of the seating plan" means that wheelchair spaces must be placed within the footprint of the seating area....