disabilities if it meets the requirements of this part and the requirements set forth in Appendices B and D to 36 CFR part 1191, which apply to buildings and facilities covered by the Americans...
Search Results "ASME: American Society of Mechanical Engineers"
Commonly Searched Documents
-
§ 37.9(a)
-
Current Guidelines Developed Primarily for Buildings and Facilities on Sites
Current Guidelines Developed Primarily for Buildings and Facilities on Sites The Access Board’s current accessibility guidelines were issued in 2004 and are known as the Americans with...
-
DSA IR 11B-3: DETECTABLE WARNINGS AT CURB RAMPS (with revisions issued through Jan. 2011)
California Government Code, Section 4451(d) Americans with Disabilities Act Standards for Accessible Design, Section 4.7.7 Discipline: Access Compliance This Interpretation of Regulations...
- American Standard Cadet 1.1 gpf FloWise Right Height Pressure Assisted Elongated Toilet 2467100
- American Standard Madera 1.28 gpf ADA EverClean Toilet with Exposed Manual Flush Valve System
- American Standard Madera 1.6 gpf ADA EverClean Toilet with Exposed Manual Flush Valve System
-
American Specialties Roval™ Collection Surface Mounted Seat Cover Dispenser Model 20477-SM
Requires the Premium User plan or above. (Login or upgrade your account!)
-
American Specialties Roval™ Steel Cover Hand Dryer with Porcelain Enamel Finish Model 0185
Requires the Premium User plan or above. (Login or upgrade your account!)
-
American Specialties Heavy Duty Stainless Steel Soap Dish with Rectangular Solid Bar Model 0398
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Background
There is no comparable mechanism for enforcing ADA requirements. They are enforced solely through the legal system....
-
T502.4 Doorways with Steps on Over-the-Road Buses
Hinges and other door mechanisms shall be permitted to protrude 4 inches (100 mm) maximum into the door opening clear width at or below 48 inches (1220 mm) in height measured from the lowest...
-
Other Resources
Adapted Fire Extinguisher A trigger mechanism eliminates the pull pin from the unit and instead has a spring device that locks the trigger in place....
-
Hand Cycle Wheelchair Attachment
Typically, these attachments include a front wheel and arm crank mechanism and incorporate a wide range of gearing options and hand brakes....
-
Sec.36.101 Purpose
The purpose of this part is to implement title III of the Americans with Disabilities Act of 1990 (42 U.S.C. 12181), which prohibits discrimination on the basis of disability by public accommodations...
-
Can you upgrade/expand an existing location without adhering to ADA standards?
To the extent that EVCS are a public accommodation or commercial facility they are covered by the federal law of the Americans with Disabilities Act....
-
Scope: ADA Standard Section 301.1
Sections 301.1 of the ADA Standards covers scoping requirements for Chapter 3 and the Building Blocks of the ADA Standards.
-
Slope: ADA Standard Section 403.3
Section 403.3 covers the current ADA Standards for the slope of walking surfaces that are part of an accessible route.
-
Figures: ADA Standard Section 104.3
Section 104.3 of the ADA Standards covers the most current information on the use of figures throughout the ADA Standards.
-
General: ADA Standard Section 203.1
Section 203.1 of the ADA Standards covers information on scoping requirements of general exceptions in the most current ADA Standards.
- Cavity Sliders USA Inc. CS SofStop™ Insert Track
- Sargent 7900 Mortise Lock Door Hardware
- AMTC HYBRIDFLUSH® Sidemount Flushometer
-
Rehabilitation Act
The standards for determining employment discrimination under the Rehabilitation Act are the same as those used in title I of the Americans with Disabilities Act....
-
2004 ADAAG
2004 ADAAG means parts I and III of the Americans with Disabilities Act and Architectural Barriers Act Accessibility Guidelines, which were issued by the Architectural and Transportation...