Circular Cross Section and Clearance (§505.5, §505.7)
Search Results "Surface Smoothness"
Filters
Commonly Searched Documents
-
Circular Cross Section and Clearance (§505.5, §505.7)
-
5.3.2.1 Transfer Sides for Stretchers
The transfer surface shall be located to provide the ability to transfer from a mobility device onto both long sides of the surface....
-
11B-226.4 Baby changing tables
If they must be modified, for example, to comply with the maximum work surface height of 34 inches, their noncompliant location (i.e., inside an accessible water closet compartment, or obstructing...
-
M301.2.2 Sunset Provision (Section-by-Section Analysis)
(Significant Changes – Transfer Surface Adjustability), this is a new provision that was added to the final rule in conjunction with the new requirement of a low height range in M301.2.1...
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side....
-
Spectrum Industries Inc. Instructor Media Console and Workstation
keep equipment cool Optional locking front doors can be mounted to swing from the left or right-hand side of the equipment rack Leveling glides keep unit level on uneven surfaces...
-
Amos Winter: The cheap all-terrain wheelchair | TED Talks
How do you build a wheelchair ready to blaze through mud and sand, all for under $200? MIT engineer Amos Winter guides us through the mechanics of an all-terrain wheelchair that's...
-
Where to Measure Along the Route
-
Parking Spaces: ADA Standard Section 502
Section 502 covers the current ADA Standards for accessible parking spaces.
-
5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302
5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302 Description: A clearance around the gripping surface is necessary to ensure sufficient space for a person...
-
M301.2.3 Transfer Sides
(width) of the surface...
-
Is My Ramp ADA Compliant?
-
Getting In
Sometimes it's fairly easy to add surfacing material, shim up the deck or porch boards, or use asphalt or concrete to bring the access route up to the height of the building floor....
-
11B-809.9.3 Removable base cabinets
Knee and toe space complying with Section 11B-306 shall be provided at sinks and work surfaces required to comply with Section 11B-809.9.4....
-
5.4.2.1 Transfer Support Length Recommendation for Stretchers
5.4.2.1 Transfer Support Length Recommendation for Stretchers On Stretchers, the transfer surface is oriented along the long dimension of the surface on which patients are positioned...
-
5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302
surface and can be effectively used to position during a transfer....
-
804.3.1 Clear Floor or Ground Space
The clear floor or ground space shall be centered on the kitchen work surface and shall provide knee and toe clearance complying with 306....
-
1017.4 Passing Spaces
tread width on trails or passing spaces at shorter intervals where the trail is heavily used or where the trail is a boardwalk or otherwise not at the same level as the adjoining ground surface...
-
804.3.1 Clear Floor or Ground Space
The clear floor or ground space shall be centered on the kitchen work surface and shall provide knee and toe clearance complying with 306....
-
11B-804.3.1 Clear floor or ground space
The clear floor or ground space shall be centered on the kitchen work surface and shall provide knee and toe clearance complying with Section 11B-306....
-
11B-804.3.1 Clear floor or ground space
The clear floor or ground space shall be centered on the kitchen work surface and shall provide knee and toe clearance complying with Section 11B-306....
-
11B-804.3.1 Clear floor or ground space
The clear floor or ground space shall be centered on the kitchen work surface and shall provide knee and toe clearance complying with Section 11B-306....
