., wood decking with spaces) shall be the same level as the interior landing, except that secondary exterior doors may have no more than ½ inch (12.7 mm) of change in height between floor...
Search Results "Side-Opening Door"
-
1132A.4, Item 2
-
5.4.1.1 Transfer Support Location for Stretchers
The transfer surface for stretchers should be oriented along the long side of the surface....
-
Besam Hurricane Resistant Automatic Sliding Door
-
AD Systems’ Door-Sliding - Bi Parting-Two Sidelites
Requires the Premium User plan or above. (Login or upgrade your account!) -
AD Systems’ Door-Sliding - Single - Two Sidelites and Transom
Requires the Premium User plan or above. (Login or upgrade your account!)
-
T302 Walking Surfaces
The technical requirements for walking surfaces include provisions on slip resistance, the maximum size of surface openings, and the maximum height of vertical surface discontinuities (i.e...
-
5.2.1.3 Transfer Surface Size for Stretchers
The transfer surface should be 28 inches wide minimum and 17 inches deep minimum located on both long sides of stretchers....
-
GAP ARMOUR
GAP ARMOUR IS AN INNOVATIVE RUBBER MATERIAL ...that easily installs (with a rubber hammer) into open concrete expansion joints to completely seal and protect!...
-
NORTON 5600 Executive Video
Video demonstration of the Norton 5600 Executive Kit.
-
Ezyjamb Installation - The Ezy Jamb system
Ezyjamb - the split type jamb manufactured form cold rolled steel with a patented profile to produce a strong and secure assembly. The unique design of Ezy jamb combines visual...
-
Hager Companies Door Pull 974P
Door Pull 974P Pull Material:- Brass, bronze, stainless steel...
-
1132A.4, Item 3
Secondary exterior doors onto decks, patios, or balcony surfaces constructed of impervious materials (e.g., concrete, brick, flagstone) may have a maximum change in height from the interior...
-
Horton ProSlide™-Blast Sliding Door System
Built To Withstand Blasts Designed to meet the US Department of Defense Unified Facilities Criteria (UFC), the ProSlide™-Blast sliding door is your solution for addressing the following...
-
3(1)
(1) On accessible routes in public and common use areas, and for primary entry doors to covered units, doors that comply with ANSI 4.13 would meet this requirement....
-
Hager Companies Door Pull 974B
Door Pull Pull Material:- Brass, bronze, stainless steel Base Material:- Black anodized aluminum ...
-
Figure 604.5.1 Side Wall Grab Bar at Water Closets – Drawing from the U.S. Access Board
-
Tactile and Visual Signs [ADA Standards §216.2, §216.4.1]
Tactile and Visual Signs [ADA Standards §216.2, §216.4.1] The IBC requires exits and exit access doors to be marked by illuminated exit signs (§1011, §1003.2.10)....
-
308.3.1 Automatic Trash Can Height
-
1132A.4, Item 1
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than ½ inch (12.7 mm) of change in height between floor surfaces....
-
1132A.4, Item 1
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than ½ inch (12.7 mm) of change in height between floor surfaces....
-
§ 38.93(e) Signage
The International Symbol of Accessibility shall be displaced on the exterior of all doors complying with this section unless all cars are accessible and are not marked by the access symbol...
-
4.1.1 Range of Examination Table and Chair Configurations
Equipment designed for patients in prone or side-lying positions (M301) Examination tables Podiatry tables 2....
-
11B-1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position,...
-
1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position,...
