Bottom-hinged appliance doors, when in the open position, shall not be required to comply with 309.3....
Search Results "Firing Position"
Filters
Commonly Searched Documents
-
804.6.2 Operable Parts
-
2.1.2
For example, a product may have a manufacturing tolerance and an installed positional tolerance but not have an orientation tolerance for plumb....
-
Sizewise Evolution
With an 850 pound capacity, and class leading 9” low position the Evolution is a safe option for ‘at risk’ fall patients....
-
Deltrex J109 Jumbo Push Plate Switch
full list of customizable options are available Features Steel box powder coated Push plate is 1/4" thick marine grade aluminum Tested for 1,000,000 cycles Furnished with fire-proof...
-
Architectural Builders Hardware Mfg., Inc. 6000 Series Push/Pull Hospital Latch
These models are designed for commercial and institutional doors up to 1-3/4" - 2-1/4", including fire doors....
-
Delta 3-Setting 2-Port Diverter Trim T11852
Product Features and Benefits Three function diverter 2 individual positions and 1 shared position Trim kit only, must purchase rough-in kit separately to complete the unit...
-
609 Grab Bars
Specifications address size, spacing, position, surfaces, fittings, and structural strength....
-
404.3.1 Clear Width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position. [ECTCR UFAS 4.13.5]...
-
1009.2.4 Seat Height
lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised (load) position...
-
G.6.vi. - May an agency shift the responsibility for making undue burden determinations to vendors (i.e., by requiring interested sources who offer EIT that meets the applicable technical provisions to explain why the purchase of such EIT would not impose an undue burden?
Only the agency is in a position to determine the difficulty or expense acquisition of EIT that meets the applicable technical provisions would impose on an agency and to know the resources...
-
7(2)(b)(ii)
(ii) Where the door swings out, a clear space is provided within the bathroom for a person using a wheelchair or other mobility aid to position the wheelchair such that the person is allowed...
-
206.2.9.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
404.3.1 Clear Width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
11B-804.6.2 Operable parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with Section 11B-309.3....
-
11B-703.8.9 Height above floor
Low resolution VMS characters shall be 40 inches (1016 mm) minimum above the floor of the viewing position, measured to the baseline of the character....
-
F. Testing
We believe, however, that PSAPs should conduct an internal testing program in which they conduct random TTY test calls of each call-taking position....
-
Sloped Surfaces
This is the "level" position. While the level is in this position, measure the distance between the bottom end of the level and the sloped surface below....
-
Additional Transfer Techniques: Use of Stretchers and Gurneys
Other equipment may be located in spaces with no room at the end of the table making it impossible to position a portable floor lift....
-
Audio Induction Loop
Consistent and uniform coverage is sometimes difficult with wire loops (although not with 3-D mats), depending on the application and the relative position of the listener....
-
§ 38.125(b)(4) Power or equipment failure
Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding any faster than 12 inches/second or their...
-
§ 38.95(b)(4) Power or equipment failure
Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding any faster than 12 inches/second or their...
-
§ 38.23(b)(4) Power or equipment failure
Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding any faster than 12 inches/second or their...
-
9. What type of reasonable accommodations may employees with hearing disabilities need?
telephone, or captioned telephone[23] a video relay service a telephone headset appropriate emergency notification systems (for example, strobe lighting on fire...
