start to close shall be calculated from the following equation: T = D/(1.5 ft/s) or T = D/(445 mm/s) where T total time in seconds and D distance (in feet or millimeters) from a point...
Search Results "Entry Point"
-
4.10.7* Door and Signal Timing for Hall Calls
-
4.10.7* DOOR AND SIGNAL TIMING FOR HALL CALLS
start to close shall be calculated from the following equation: T = D or T = D 1.5 ft/s 445 mm/s where T = total time in seconds and D = distance (in feet or millimeters) from a point...
-
1.1.7 Measurement of parking areas
This means that the overall slope in the long dimension should be measured along the center of the aisle or zone using the ends of the area as elevation measuring points and cross slope...
-
11B-411.2.1.2.3 Accessibility function button
The dots shall be spaced ¼ inch (6.4 mm), measured center to center, in the form of an equilateral triangle with a vertex pointing up....
-
Summary of significant issues raised by public comments in response to the NPRM Paperwork Reduction Act analysis and annual reporting burden estimate
TIA questioned the Board's estimates with respect to a contact point, citing the disparity between the Board's estimates for requests for a description of the accessibility and compatibility...
-
11B-104.1.1 Construction and manufacturing tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
Clear Width of Circulation Paths and Maneuvering Clearances at Wheelchair Spaces
wheelchair spaces) or 12 inches (for side entry wheelchair spaces) when wheelchair spaces are confined on three sides....
-
Ascension Protege Portable Wheelchair Lift 5442P
The latest product offering from Ascension will open customers to a lower price point, while retaining the superior quality and performance only available from an Ascension lift....
-
19 Inch Low Height
recommendation: Ensures that such equipment is accessible to, and usable by, individuals with accessibility needs and will allow independent entry to, use of, and exit from the...
-
Sargent HC 8800 Rim Exit Device
"Anti-walk" latchbolt design eliminiates the need for guarded latchbolt Withstands over 5 times ANSI/BHMA A156.3 2008 grade 1 standards for static load test simulating forced entry...
-
SEAT HEIGHT MEASUREMENT DETAIL
SEAT HEIGHT MEASUREMENT DETAIL Regardless of measurement technique used, the height is measured at the highest point of the seat, inclusive of bolsters, with the foam in an uncompressed...
-
704.11.1 Parapet construction
The height of the parapet shall not be less than 30 inches (762 mm) above the point where the roof surface and the wall intersect....
-
1008.3 Transfer Systems
Designers should minimize the distance between the points where a child transfers from a wheelchair or mobility device and where the elevated play components are located....
-
11B-1008.3 Transfer systems
Designers should minimize the distance between the points where a child transfers from a wheelchair or mobility device and where the elevated play components are located....
-
Introduction
The Accommodation and Compliance Series is a starting point in the accommodation process and may not address every situation....
-
Kick Scooters
Steering handles are attached to the platform, allowing users an additional point of contact with the board to steer the device and maintain an upright position....
-
9.2* POST OFFICE LOBBIES
(1) All fixed partitions must be installed to withstand a 250-pound force applied at any point and from any direction....
-
11B-411.2.1.2.3 Accessibility function button
The dots shall be spaced ¼ inch (6.4 mm), measured center to center, in the form of an equilateral triangle with a vertex pointing up....
-
11B-1008.3 Transfer systems
Designers should minimize the distance between the points where a child transfers from a wheelchair or mobility device and where the elevated play components are located....
-
11B-1008.3 Transfer systems
Designers should minimize the distance between the points where a child transfers from a wheelchair or mobility device and where the elevated play components are located....
-
11B-703.7.2.6.3 Unisex toilet and bathing facilities
A circle, ¼ inch (6.4 mm) thick and 12 inches (305 mm) in diameter with a ¼ inch (6.4 mm) thick triangle with a vertex pointing upward, superimposed on and geometrically inscribed within...
-
Horton HD-Storm™ 70/80/85 PSF Belt Drive
hurricane rated HD-Storm™ sliding door system offers the highest pounds per square foot (PSF) rating available on the market along with the extra security of heavy duty construction and 3-point...
-
Hoyer Advance-E Power Lift
Minimum lifting range - 15.3" Base width (open) - 42.5" Base width (closed) - 26.3" Base length - 51" Base height - 4.5" Sling type - 4 point...
-
Automatic Doors and Power Assisted Doors [4.13.12]
Low-powered doors are typically used at entries with lower levels of traffic to provide an alternative to manual doors, including revolving doors, in the same location....
