It is generally acceptable to use required clearances to provide wheelchair turning space....
Search Results "Clearance Around Base"
Filters
Commonly Searched Documents
-
809.2.2 Turning Space
-
809.2.2 Turning Space
It is generally acceptable to use required clearances to provide wheelchair turning space....
-
International Association of Accessibility Professionals (IAAP)
The International Association of Accessibility Professionals (IAAP) is a membership-based organization for individuals and organizations that are focused on accessibility or are in the process...
-
Envirobond is Self-Healing
If cracking or movement occurs, rain water reactivates the plant-based glue, Organic-Lock™, allowing the joint material to re-mould and fill any cracks....
-
11B-603.2.3 Door swing
Doors shall not swing into the clear floor space or clearance required for any fixture. ...
-
Ground Level Play Components: ADA Standard Section 240.2.1
Section 240.2.1 covers scoping requirements in the current ADA Standards for ground level play components.
-
11B-240.2.1 Ground level play components
Where a stand-alone slide is provided, an accessible route must connect the base of the stairs at the entry point to the exit point of the slide....
-
206.8 Security Barriers
The accessible route shall permit persons with disabilities passing around security barriers to maintain visual contact with their personal items to the same extent provided others passing...
-
11B-206.8 Security barriers
The accessible route shall permit persons with disabilities passing around security barriers to maintain visual contact with their personal items to the same extent provided others passing...
-
2. a. iv. Path-of-Travel (wheelchair) space allowances
Accessible route turns around an obstruction: C2. T-Shaped Space for 180° degree turns C3. Maximum doorway depth and passage width...
-
Error/Omission: Food service queuing areas are too narrow and do not provide adequate clear width for turns.
If a person in a wheelchair must make a turn around an obstruction, the minimum clear width of the accessible route shall be as shown in Fig. 7(a) and (b)....
-
11B-206.8 Security barriers
The accessible route shall permit persons with disabilities passing around security barriers to maintain visual contact with their personal items to the same extent provided others passing...
-
11B-206.8 Security barriers
The accessible route shall permit persons with disabilities passing around security barriers to maintain visual contact with their personal items to the same extent provided others passing...
-
TTY
Machinery that employs interactive text-based communication through the transmission of coded signals across the telephone network....
-
Wheelchair Spaces (M303.2)
M303.2 includes technical criteria for orientation, width, depth, and knee and toe clearance at wheelchair spaces....
-
11B-410.1 General
Because an accessible route requires an 80 inch (2030 mm) vertical clearance, care should be taken in selecting lifts as they may not be equally suitable for use by people using wheelchairs...
-
References
“ASTM F1951 Standard specification for determination of accessibility of surface systems under and around playground equipment.” West Conshohocken:ASTM....
-
705.1.1 Dome Size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (23 mm) minimum and 1.4 inches (36 mm) maximum, a top diameter of 50 percent of the base diameter minimum...
-
705.1.1 Dome Size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (23 mm) minimum and 1.4 inches (36 mm) maximum, a top diameter of 50 percent of the base diameter minimum...
-
11B-306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
608.2.1 Transfer Type Shower Compartments
Clearance of 36 inches (915 mm) wide minimum by 48 inches (1220 mm) long minimum measured from the control wall shall be provided....
-
306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
General [5.1]/ Access Aisles [5.3]
The required clear width (36 inches minimum) is specified for the clearance between the edges of fixed tables or between table edges and walls....
-
11B-306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
