Signs containing tactile characters shall be located so that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided...
Search Results "Floor Button"
Filters
Commonly Searched Documents
-
703.4.2 Location
-
407.2.3.2 Car Designations
Destination-oriented elevators shall provide tactile car identification complying with 703.2 on both jambs of the hoistway immediately below the floor designation....
-
407.2.3.2 Car Designations
Destination-oriented elevators shall provide tactile car identification complying with 703.2 on both jambs of the hoistway immediately below the floor designation....
-
PART 3: ACCESSIBLE EXAMINATION ROOMS
.); and adequate clear floor space inside the room for side transfers and use of lift equipment....
-
407.2.3.2 Car Designations
Destination-oriented elevators shall provide tactile car identification complying with 703.2 on both jambs of the hoistway immediately below the floor designation....
-
Plan 6B: 12-Foot Wide Accessible Guest Room
• Recessed lavatory with vanity counter top permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear floor...
-
30.1 Q. Would it be acceptable to use removable base cabinets beneath a wall-hung lavatory where a parallel approach is not possible?
For example, the tile or other floor finish must extend under the removable base cabinet....
-
A4.5.1 General
It is recognized that the coefficient of friction varies considerably due to the presence of contaminants, water, floor finishes, and other factors not under the control of the designer...
-
Plan 4B: 13-Foot Wide Accessible Guest Room
• Recessed alternate roll-in shower location permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear floor...
-
Plan 6A: 12-Foot Wide Accessible Guest Room
• Recessed lavatory with vanity counter top permits shorter rear grab bar at water closet (section 604.5.2); • T-shaped turning space in room (section 603.2.1); • Required clear floor...
-
Bobrick Accessibility Video -- Design for Turning Radiuses
Push Girl Mia with the architect's help shows how to design an accessible restroom. See www.bobrick.com for more info!
-
26.1 Q. Is a parallel approach required at the shower, as shown in Figure 7(d) of the Guidelines?
A. Yes. For a 36 x 36 shower, as shown in Figure 7(d), a person in a wheelchair would typically add a wall hung seat. Thus the parallel approach as shown in Figure 7(d) is essential...
-
3.4.5 Grade
The clear ground space and turning space required by section 3.4.3 shall have a slope of no more than 1:48 (2 percent) in any direction. Exception. When the surface is not paved...
-
Husky 10" Multi-Function Standard Digital Level
Model # THD9403 Internet # 205999357 The Husky 10 in. Digital Level is convenient, accurate and versatile. The digital display is easy to read. 3 measurement units and audible...
-
Sears Brands, LLC Craftsman 10 in. Digital LaserTrac® Level
Description Item # 00948292000P Model # 48292 Keep It Straight with the 10 in. Digital LaserTrac Level The 10 in. Digital LaserTrac Level uses digital technology to clearly...
-
Access Board: Accessible Route Openings
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
11B-703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided...
-
11B-703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided...
-
11B-703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided...
-
Employee Work Areas: ADA Standard Section 203.9
Section 203.9 covers scoping requirements of general exceptions for employee work areas in the most current ADA Standards.
-
F232.2.1.1 Beds
In cells having more than 25 beds, at least 5 percent of the beds shall have clear floor space complying with 807.2.3....
