Lifts, ramps, or other suitable devices not normally used for the movement of freight must be available, if the terminals at such airports are not equipped with passenger loading bridges...
Search Results "Bus Loading Zone"
-
2.8 Aircraft and Air Carrier Facility Accessibility.
-
AJW Architectural Products U851 Seat Cover Dispenser - Surface Mounted
Loading of product is accomplished from below without having to open any locking mechanism or access panel....
-
Butler Mobility Inclined Platform Wheelchair Lift
(350 kg)In the event of a power failure, the standard battery backup will bring the platform up and down as many as 12-15 times, depending on the age of the battery, the height and the load...
-
American Specialties 9018 Recess Mounted Stainless Steel Horizontal Baby Changing Station
Unit shall comply with 2010 ADA Accessibility Standards and shall support a static load of 300 lbs. and be tested in excess of 350 lbs....
-
502.5 Vertical Clearance
If compliance with this minimum height clearance requirement will cause the structure to exceed local height limitations imposed by local zoning, planning, or fire ordinances, or will result...
-
2. CREATING A SPACE
Look for spaces that are out of potentially dangerous areas (such as evacuation zones) and that are central to the population you serve....
-
M301.3.1 Transfer Supports
Note 1: As with other patient positioning aids, a positioning support’s load bearing design may be different than that of a transfer support....
-
Bradley Plastic Baby Changing Station
STRENGTH NOTE: Unit complies with ASTM F2285 Standard that requires commercial diaper changing stations be able to support a static load of up to 100 lbs....
-
Inpro Corporation JointMaster® 103 Series-VCT Expansion Joint Systems
to clean flush seals, no dirt or water traps Dual durometer seal provides a secure fit and optimal flexibility Snap-fit design for easy on-site assembly Standard loading...
-
Rebuilding Together Henry County - Geneseo, IL
Business executives, students, bus drivers, politicians and policemen pitch in annually across America to help build better communities....
-
AJW Architectural Products UG30-A Series UG30-A12 12" Concealed Set Screw Flange, 1.5" Diameter Grab Bar - Configuration A
Strength: Bars with a 1 1/2" offset clearance will support loads in excess of 900lbs when properly installed....
-
AJW Architectural Products UG20-A Series UG20-A12 12" Concealed Set Screw Flange, 1.25" Diameter Grab Bar - Configuration A
Strength: Bars with a 1 1/2" offset clearance will support loads in excess of 900lbs when properly installed....
-
11B-810.5.3 Platform and vehicle floor coordination
The vehicle guidelines, divided by bus, van, light rail, rapid rail, commuter rail, intercity rail, are available at http://www.access-board.gov/....
-
810.5.3 Platform and Vehicle Floor Coordination
The vehicle guidelines, divided by bus, van, light rail, rapid rail, commuter rail, intercity rail, are available at www.access-board.gov....
-
11B-810.5.3 Platform and vehicle floor coordination
The vehicle guidelines, divided by bus, van, light rail, rapid rail, commuter rail, intercity rail, are available at http://www.access-board.gov/....
-
11B-810.5.3 Platform and vehicle floor coordination
The vehicle guidelines, divided by bus, van, light rail, rapid rail, commuter rail, intercity rail, are available at www.access-board.gov....
-
I. Ensuring Compliance Now and In the Future
Other priorities include, in descending order, curb ramps at pre-ADA locations with pedestrian crossings providing access to local government facilities, bus stops and other transportation...
-
1129B.3, Item 2
One in every eight accessible spaces, but not less than one, shall be served by a loading and unloading access aisle 96 inches (2438 mm) wide minimum placed on the side opposite the driver's...
-
BACKGROUND
Transfer supports will deform to some degree under these loads, it must remain stable enough for use....
-
11B-403.5.1 Clear width
The clear width for walking surfaces in corridors serving an occupant load of 10 or more shall be 44 inches (1118 mm) minimum. 3. ...
-
General [4.1.6(1)]
As defined in ADAAG, this covers existing structural or space constraints that prohibit compliance, such as removing or altering a load-bearing member of the structural frame....
-
1010.1.5 Floor elevation
Doors serving equipment spaces not required to be adaptable or accessible and serving an occupant load of five or less shall be permitted to have a landing on one side to be not more than...
-
Surfaces (R302.7) (Section-by-Section Analysis)
because the gap can entrap the wheelchair casters.39 The Federal Railroad Administration is sponsoring research to develop materials or devices that will fill the flangeway gap under light loads...
-
Appropriate Situational Applications of Technology
museum staff or variety of vendor(s) to enable access at first public opening of exhibits regardless of deadlines IR emitter (or other wireless signals) with ability to adjust for narrow-zone...
