[2010 ADAS] EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such slopes are...
Search Results "Site Arrival Point"
Commonly Searched Documents
-
11B-405.2 Slope
-
Is compliance required for parking spaces designed specifically for recreational vehicles such as motor homes and camping or boating trailers?
The ABA Standards, which apply to federally funded sites, provide requirements for outdoor developed areas on federal lands such as camping and picnic facilities that include provisions...
-
11B-405.2 Slope
[2010 ADAS] EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such slopes are...
-
11B-405.2 Slope
[2010 ADA Standards] EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such...
-
Technically Infeasible
because existing structural conditions would require removing or altering a load-bearing member that is an essential part of the structural frame; or because other existing physical or site...
-
1.3 General Exceptions
Sites, buildings, facilities and elements are exempt from these requirements to the extent specified by Section 11B-203."...
-
Residential Facilities
which are covered by a single contract for federal financial assistance or application for assistance, or are treated as a whole for processing purposes, whether or not located on a common site...
-
"Existing Facility" (Section-by-Section Analysis)
Under the ADA, a facility may be one or more of three types at different points in time: (1) an existing facility, (2) an altered facility, or (3) a newly designed and constructed facility...
-
Trail Construction Techniques
Numerous illustrations help explain the main points. The notebook is at http://www.fhwa.dot.gov/environment/fspubs/07232806/index.htm....
-
4.3.7 Clear Floor Space for Reaching
, the horizontal distance from the front-most (anterior-most) point of the wheelchair or occupant to the rear-most (posterior-most) point of the wheelchair or occupant; (C)the horizontal...
-
608.2.1 Transfer Type Shower Compartments
Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch (915...
-
Low Vision and Blindness
And of course, the smaller the fraction – 20/20, is one; 20/200, point-one....
-
Title II Quiz
Editor's Note The following link points to the quizzes referenced above: http://www.adaactionguide.org/resources#titleiiquiz...
-
Prominent Feature
A prominent feature may be the focal point, main attraction, or destination of a trail, or it may simply be an interesting secondary feature. ...
-
11B-407.2.3.1 Floor designation
The outside diameter of the star shall be 2 inches (51 mm) and all points shall be of equal length. Raised characters, including the star, shall be white on a black background....
-
1015.2 Where required
surfaces, including mezzanines, equipment platforms, aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured vertically to the floor or grade below at any point...
- TownSteel MRXA Grade 1 Mortise Lock with Ligature Resistant Trim
-
Taking Photographs
It is always useful to first take a photo that will clearly identify the site, then the elements surveyed....
-
F216.5 Parking
Where a total of four or fewer parking spaces, including accessible parking spaces, are provided on a site, identification of accessible parking spaces shall not be required. 2. ...
-
C. Food Service
At each food service establishment on this site where food and/or drink is served for consumption (i.e.: direct counter service) at counters or bars, is there a minimum 60" long portion...
-
216.5 Parking
Where a total of four or fewer parking spaces, including accessible parking spaces, are provided on a site, identification of accessible parking spaces shall not be required. 2....
-
Bookmarks
Bookmark emergency resource mobile sites so you can quickly access them....
-
TECHNICALLY INFEASIBLE
because the existing structural conditions require the removal or alteration of a load-bearing member that is an essential part of the structural frame, or because other existing physical or site...
-
TECHNICALLY INFEASIBLE
because the existing structural conditions require the removal or alteration of a load-bearing member that is an essential part of the structural frame, or because other existing physical or site...