The toilet’s centerline is 19 inches from the side wall, the toilet seat height is 20 inches, and the flush valve control is located on the closed side of the toilet. ...
Search Results "Rectangular Seat"
Filters
Commonly Searched Documents
-
Attachment J
-
Shower Enclosures: ADA Standard Section 608.8
Section 608.8 covers the current ADA Standards for enclosures for shower compartments.
-
Submerged Depth: ADA Standard Section 1009.2.8
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
-
Clear Floor or Ground Space: ADA Standard Section 903.2
Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
11B-608.8 Shower enclosures
Enclosures for shower compartments shall not obstruct controls, faucets, and shower spray units or obstruct transfer from wheelchairs onto shower seats....
-
11B-1009.2.8 Submerged depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (457 mm) minimum below the stationary water level....
-
American Specialties Single Robe Hook 7340
Post shall be 1/2" x 1" (13 X 25) rectangular tubing with formed mounting flange and bracket welded on end....
-
Symmons Duro Shower Valve S-3600
Its precise rectangular form creates a unique minimalistic look for any modern contemporary bathroom....
-
Amusement Rides: ADA Standard Section 216.12
Section 216.12 covers scoping requirements in the current ADA Standards for signs at amusement rides.
-
AISLE
[DSA-AC] A circulation path between objects such as seats, tables, merchandise, equipment, displays, shelves, desks, etc., that provides clearances in compliance with this code....
-
§ 36.406(f)(3)
(3) Wheelchair spaces and companion seats are not located on (or obstructed by) temporary platforms or other movable structures, except that when an entire seating section is placed on temporary...
-
Ticket prices. (Section-by-Section Analysis)
In the NPRM, the Department proposed § 35.138(e) requiring that ticket prices for accessible seating be set no higher than the prices for other seats in that seating section for that event...
-
11B-903.2 Clear floor or ground space
Clear floor or ground space complying with Section 11B-305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
accessible route between stories, an accessible route shall not be required to a mezzanine dining area where the mezzanine contains less than 25 percent of the total combined area for seating...
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
MEASUREMENT TECHNIQUE
is measured between the perineal cutout and the hinge point at the back of the seat....
-
§ 35.138(g) Ticket prices
The price of tickets for accessible seating shall not be set higher than for tickets to seating located in the same seating section for the same event. ...
-
11B-608.10 Soap dish
Where a soap dish is provided, it shall be located on the control wall at 40 inches (1016 mm) maximum above the shower floor, and within the reach limits from the seat....
-
II-5.2000 Methods for providing program accessibility.
ILLUSTRATION 4: A municipal performing arts center provides seating at two prices -- inexpensive balcony seats and more expensive orchestra seats....
-
Size: ADA Standard Section 903.3
Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
General: ADA Standard Section 405.1
Section 405.1 of the ADA Standards covers information in the current ADA Standards for ramps.
-
Structural Strength: ADA Standard Section 903.6
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
11B-1009.2.6 Footrests and armrests
Footrests shall be provided and shall move with the seat. The seat shall have two armrests. ...
