Search Results "Raised Judging Area"

• Federal Documents > Technical Assistance > Accessible Play Areas - A Summary of Accessibility Guidelines for Play Areas
  Maximum Slope at Ground Level

  Berms are sometimes used to provide access to elevated play areas....

• Federal Documents > Technical Assistance > Guide to the ADA Standards
  Why are detectable warnings no longer required for all curb ramps or at hazardous vehicular areas?

  In the last update, the ADA Standards were revised to focus more clearly on facilities located on sites in recognition of separate criteria the Access Board is developing for public...

• Links > Federal Department or Agency
  USDA Forest Service Accessibility Guidebook for Ski Areas Operating on Public Lands
  

  The purpose of this guidebook is to provide information for ski areas authorized, under a special-use permit from U.S....

• Products and Additional Resources > Products
  ADA Sign Depot Unisex Wheelchair Accessible Restroom Sign with Tactile Text, Symbols and Grade 2 Braille - 8" x 8"
  

  8" x 8" ADA Accessible Unisex Restroom Wall Sign with Male, Female and Wheelchair Symbols has Tactile (raised) Text and Symbols and Grade 2 Braille ADA compliant non-glare...

• State and Local Documents > Referenced Standards > Excerpts from 2003 INTERNATIONAL BUILDING CODE®
  1007.6.2 Separation

  Each area of refuge shall be separated from the remainder of the story by a smoke barrier complying with Section 709....

• State and Local Documents > Referenced Standards > Excerpts from 2000 INTERNATIONAL BUILDING CODE®
  1003.2.13.5.2 Separation

  Each area of refuge shall be separated from the remainder of the story by a smoke barrier complying with Section 709....

• State and Local Documents > Guidelines > Accessibility Guidebook for Outdoor Recreation and Trails
  Designing Access Into the Outdoor Environment

  Suppose you are assigned a project to reconstruct portions of a picnic area or to design a trail, but the work doesn't include any buildings....

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M303.3.3 Ramped

  Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3.

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  703.4 Installation Height and Location

  Signs with tactile characters shall comply with 703.4.

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M303.3.3 Ramped (Section-by-Section Analysis)

  The MDE NPRM proposed that for equipment with a change in level at the entry of a wheelchair space, level changes greater than ½ inch high would be required to be ramped and comply...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height

  5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height. Edge protection is not required on platforms 1 ½ inches or less in height.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations

  5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations The Committee recommends a two-inch high edge protection on the back of the...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.1.2.3 Double Ramped Entry – Edge Protection on the Platform Sides

  5.8.1.2.3 Double Ramped Entry – Edge Protection on the Platform Sides. A minimum 2 inch high edge protection must be provided on both sides of the platform for double ramped entry...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.1.2.2 Single Ramped Entry – Edge Protection on the Platform and Platform Sides

  5.8.1.2.2 Single Ramped Entry – Edge Protection on the Platform and Platform Sides. A 2 inch high edge protection must be provided on the back of the platform, opposite the entry...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height Recommendations

  5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height Recommendations The Committee recommends that no edge protection be required on platforms of 1½ inches or less...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.1.2.3 Double Ramped Entry - Edge Protection on the Platform sides Recommendations

  5.8.1.2.3 Double Ramped Entry - Edge Protection on the Platform sides Recommendations The Committee recommends a minimum two-inch high edge protection on both sides of the...

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-703.4 Installation height and location

  Signs with tactile characters shall comply with Section 11B-703.4.

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM
  M303.3.3 Ramped

  Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3.

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM
  M303.3.3.4 Edge Protection

  Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side.

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-703.4 Installation height and location

  11B-703.4 Installation height and location. Signs with tactile characters shall comply with Section 11B-703.4.

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-703.4 Installation height and location

  Signs with tactile characters shall comply with Section 11B-703.4.

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  703.4 Installation Height and Location

  703.4 Installation Height and Location. Signs with tactile characters shall comply with 703.4.

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  703.4 Installation Height and Location

  Signs with tactile characters shall comply with 703.4.

• Federal Documents > Technical Assistance > ADAAG Manual
  Temporary Suspension

  Temporary Suspension In response to business and user concerns about the need for the detectable warnings specified in 4.29 at curb ramps and hazardous vehicular areas, the Access Board...