paths are not present—and thus meet the accessible route requirement....
Search Results "Raised Circulation Path"
Filters
Commonly Searched Documents
-
Accessible teeing grounds, putting greens, and weather shelters. (Section-by-Section Analysis)
-
Accessible teeing grounds, putting greens, and weather shelters. (Section-by-Section Analysis)
paths are not present, thus meeting the accessible route requirement....
-
7(2)(b)(i)
(i) Where the door swings into the bathroom, there is a clear space (approximately, 2' 6" by 4'0") within the room to position a wheelchair or other mobility aid clear of the path of the...
-
BLENDED TRANSITION
[DSA-AC] A raised pedestrian street crossing, depressed corner, or similar connection between the pedestrian access route at the level of the sidewalk and the level of the pedestrian street...
-
1009.2.4 Seat Height
height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised...
-
Elevators
The "Disco" elevator hoist way entrance lacks raised and Braille floor designations on both jambs and the elevator emergency call system does not operate without voice communication....
-
I. Parking Garage
Does the parking garage serving the lodging facility allow at least 98" of vertical clearance for vehicles with raised roofs to approach, use and exit the accessible parking spaces?...
-
407.2.1 Call Controls
Call buttons shall be raised or flush. EXCEPTION: Existing elevators shall be permitted to have recessed call buttons....
-
Directions
Some suggested using the raised letter title as an anchor point as the title was easy to find....
-
Talking three-dimensional models for way-finding and orientation
Talking three-dimensional models for way-finding and orientation Touchable models provide more spatially accurate information than the simple raised line map....
-
§ 38.83(b)(2)(i) Requirements
Where provided, each control for deploying, lowering, raising, and stowing the lift and lowering the roll-off barrier shall be of a momentary contact type requiring continuous manual pressure...
-
§ 38.23(b)(2)(i) Requirements
Where provided, each control for deploying, lowering, raising, and stowing the lift and lowering the roll-off barrier shall be of a momentary contact type requiring continuous manual pressure...
-
§ 38.159(b)(2)(i) Requirements
Where provided, each control for deploying, lowering, raising, and stowing the lift and lowering the roll-off barrier shall be of a momentary contact type requiring continuous manual pressure...
-
Announced Drills
time to practice: communicating emergency information to people with vision and hearing loss, coping with different scenarios and unforeseen situations such as blocked paths...
-
ACCESSIBLE ROUTE
A continuous unobstructed path connecting all accessible elements and spaces in a building or facility....
-
11B-703.6.3 Text descriptors
Text descriptors shall comply with Sections 11B-703.2 _|Signs; Raised Characters|_, 11B-703.3 _|Braille|_ and 11B-703.4 _|Installation Height and Location|_....
-
D5
If there is a raised threshold, is it no higher than 3/4 inch at the door and beveled on both sides?...
-
M5
If there is a raised threshold, is it no higher than 3/4 inch at the door and beveled on both sides?...
-
Jamb Signage
...are all elevator jambs provided with signs placed on both sides designating the floor with 2" minimum height raised letters and Braille characters centered at 60" above the finish floor...
-
11B-411.2.1.4.1.2 Identification
Buttons shall be identified by raised characters and symbols, white on a black background, complying with Section 11B-703.2 and Braille complying with Section 11B-703.3....
-
5e.
Are signs mounted on both sides of the elevator hoistway door opening that designate the floor with 2-inch minimum-height raised letters and Braille characters centered at 60 inches above...
-
11B-411.2.1.4.1.2 Identification
Buttons shall be identified by raised characters and symbols, white on a black background, complying with Section 11B-703.2 and Braille complying with Section 11B-703.3....
-
11B-411.2.1.4.1.2 Identification
Buttons shall be identified by raised characters and symbols, white on a black background, complying with Section 11B-703.2 and Braille complying with Section 11B-703.3....
-
11B-810.6 Rail station signs
Emerging technologies such as an audible sign systems using infrared transmitters and receivers may provide greater accessibility in the transit environment than traditional Braille and raised...