ASTM F 1292-99 and ASTM F 1292-04 establish a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and...
Search Results "Mitigating Measures"
Commonly Searched Documents
-
[2010 ADAS] 105.2.3 ASTM
-
Arriving at the Polling Place: Parking
(See Part 2 of this document for tips on measuring slopes and cross slopes.) Parking requirements are in Section A of the 2016 Checklist found in Part 3 of this document....
-
706.1 General
Sound pressure levels (SPL), expressed in decibels, measure output sound volume....
-
Services and Facilities
Under Title II, a public entity must ensure that its program as a whole is accessible; this may entail removing architectural barriers or adopting alternative measures, such as relocating...
-
Mounting Height and Location
Such signs are to be mounted so that the tactile elements (raised characters and braille) are between 48 to 60 inches high, measured to the baseline of characters. Comment....
-
Toilet Paper Dispensers
This may effectively preclude some dispensers from being located above grab bars in view of the minimum mounting height of grab bars (33 inches, measured to the top of the gripping surface...
-
4. ABSOLUTE DIMENSIONS
In recent projects however, water closet centerline dimensions in newly constructed toilet rooms for adults measured as much as 21" and as little as 15" from the adjacent wall....
-
Ground-Level Accessible Routes
At ground level, objects may not protrude into the 60-inch wide space of an accessible route up to or below the height of 80 inches (2030 mm), measured above the accessible route surface...
-
IMPLICATION OF A 19-INCH MINIMUM STANDARD FOR THE HIGHEST POINT IN THE LOWEST ADJUSTABLE POSITION
Illustration of measurement height at bolsters relative to lower transfer surface...
-
706.1 General
Sound pressure levels (SPL), expressed in decibels, measure output sound volume....
-
R410.6 Character Height
Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further approach towards the sign....
-
706.1 General
Sound pressure levels (SPL), expressed in decibels, measure output sound volume....
-
ATMs. (Section-by-Section Analysis)
The Department believes that the limitations on the effective communication requirements, which provide that a covered entity does not have to take measures that would result in a fundamental...
-
2.1.3. Baseline
To estimate the incremental cost impact, the total costs are measured against a baseline. ...
-
MISCELLANEOUS PROVISIONS
Reports will include detailed photographs showing measurements, architectural plans, work orders, notices published in the newspaper, copies of adopted policies, and proof of efforts to...
-
Study Limitations
Third, measurements were taken on only individual users, not users traveling side-by-side or one in front of the other....
-
¼ Inch Minus Limestone
Eventually, the surface developed an erosion ditch measuring approximately 16 feet and at a depth of approximately 3 inches....
- The UpScale Medical Exam Table
- Stable and rock solid. See for yourself!
-
2. Who is considered a person with a disability under Title II of the ADA and Section 504?
Congress has made clear that the definition of disability in the ADA and Section 504 is to be interpreted broadly.43 Even if an individual’s substantially limiting impairment can be mitigated...
-
Section 36.208(c) (Section-By-Section Analysis and Response to Comments)
nature, duration, and severity of the risk; the probability that the potential injury will actually occur; and whether reasonable modifications of policies, practices, or procedures will mitigate...
- Bradley Soap Dispenser With ABS Plastic Valve 6563
- Yale 8800 Series Grade 1 Mortise Locks