Search Results "Lavatory Clear Floor Space"
-
Figure 1003.3.1 (Exception 2) Edge Protection at Boat Slips – Drawing from the U.S. Access Board
-
11B-606.1 General
Lavatories and sinks shall comply with Section 11B-606. [2010 ADAS] Advisory 606.1 General. ...
-
4.6.3* Parking Spaces
Accessible parking spaces shall be at least 96 in (2440 mm) wide....
-
11B-606.1 General
Lavatories and sinks shall comply with Section 11B-606. [2010 ADAS] Advisory 606.1 General....
-
Willoughby Industries HS-1014-96-HC-FA 18" wide Lavatory
Front access lavatory shall be Willoughby Model No. HS-1014-96-HC-FA. Fixture shall be fabricated from 14 gauge, type 304 stainless steel....
-
Symmons Symmetrix® Two Handle Lavatory Faucet (Centerset) S-250-0-LWG-1.5
Symmons Symmetrix® Two Handle Lavatory Faucet S-250 Series Symmetrix two handle cast brass centerset lavatory faucet 4" mount Ceramic cartridges 1/2" IPS inlet connections standard...
-
307.5 Required Clear Width
307.5 Required Clear Width. Protruding objects shall not reduce the clear width required for accessible routes....
-
Attachment I
clear floor space of 30 by 48 inches that allows a forward or parallel approach by a person using a wheelchair. ...
-
11B-606.1 General
Lavatories and sinks shall comply with Section 11B-606. Advisory 11B-606.1 General....
-
Clear Width [1018.4]
The clear width of beach access routes must be a minimum of 60 inches to enable people using mobility devices to pass people traveling in the opposite direction without veering off the...
-
Grohe Allure Brilliant Lavatory Centerset M-Size Faucet
Allure Brilliant Lavatory centerset M-Size • GROHE StarLight® finish • GROHE SilkMove® ceramic cartridge • GROHE EcoJoy® technology for less water and perfect flow • GROHE WaterCare®...
-
302.1 Floor or Ground Surfaces
302.1 Floor or Ground Surfaces Both section 4.5.1 of the 1991 Standards and section 302.2 of the 2010 Standards require that floor or ground surfaces along accessible routes and in accessible...
-
403.2 Floor or Ground Surface
403.2 Floor or Ground Surface. Floor or ground surfaces shall comply with 302....
-
2) Where the Standard says "Changes in level are not permitted"
2) Where the Standard says "Changes in level are not permitted", such as 304.2 for turning spaces: Here the standard is followed by an unenforceable advisory that says, "As used in this...
-
Inclusion Solutions Offset Door Hinge
These special hinges are designed to swing the door clear of the opening, adding about 2" additional clearance for wheelchairs and walkers....
-
11B-302.2 Carpet
Exposed edges of carpet shall be fastened to floor surfaces and shall have trim on the entire length of the exposed edge. Carpet edge trim shall comply with Section 11B-303....
-
11B-302.2 Carpet
Exposed edges of carpet shall be fastened to floor surfaces and shall have trim on the entire length of the exposed edge. Carpet edge trim shall comply with Section 11B-303....
-
Passing Spaces on Trails
A 60-inch (1,525-millimeter) clear tread width is required for two wheelchairs to pass safely and comfortably on a trail....
-
11B-809.8.3.1 Floor or ground surface
Floor or ground surface within required maneuvering clearances shall not have slopes exceeding 1:48....
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3....
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3....
-
11B-1002.4.4.1 Width and length
Wheelchair spaces shall provide a clear width of 30 inches (762 mm) minimum and a clear length of 48 inches (1219 mm) minimum measured to 9 inches (229 mm) minimum above the floor surface...
-
Width and Length: ADA Standard Section 1002.4.4.1
Wheelchair spaces shall provide a clear width of 30 inches (760 mm) minimum and a clear length of 48 inches (1220 mm) minimum measured to 9 inches (230 mm) minimum above the floor surface...
-
11B-1002.4.4.1 Width and length
Wheelchair spaces shall provide a clear width of 30 inches (762 mm) minimum and a clear length of 48 inches (1219 mm) minimum measured to 9 inches (229 mm) minimum above the floor surface...
