Mounts flush against side wall in accessible toilet compartment to allow clearance for grab bar above unit has toilet tissue dispenser on left side of unit....
Search Results "Compartment Hardware"
Commonly Searched Documents
- Bobrick B-30919 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
2. a. iii. Costs
issues that should be evaluated in choosing a new business location: Adequate accessible parking, Accessible entrance, Doors at entrances, Accessible door hardware...
-
Is compliance on both sides of a door or gate required when it is usable only from one side?
Examples include exit-only doors with no operating hardware on the exterior side or separate enter and exit fare gates in transit stations....
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
§ 38.159(b)(1) Design load
Nonworking parts, such as platform, frame and attachment hardware which would not be expected to wear, shall have a safety factor of at least three, based on the ultimate strength of the...
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware. ◼...
-
413.1.1 Caption Controls (Section-by-Section Analysis)
413.1.1 Caption Controls (Section-by-Section Analysis) This proposed section would require that, where video-capable hardware provides physical volume adjustment controls, such ICT must...
-
4.2.6. Staff Training Frequency
Percent ($ millions) Cost Category Staff Training 4x Per Year Primary Analysis Percent Change Captioning Hardware...
-
1010.1.9.8.1 Delayed egress locking system
An attempt to egress shall initiate an irreversible process that shall allow such egress in not more than 15 seconds when a physical effort to exit is applied to the egress side door hardware...
- Salsbury Industries See Through Metal Locker Triple Tier 1 Wide
- Salsbury Industries See Through Metal Locker Double Tier 1 Wide
- Salsbury Industries See Through Metal Locker Double Tier 3 Wide
- Salsbury Industries See Through Metal Locker Triple Tier 3 Wide
-
608.2.2.1 Clearance
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
-
Alternate Roll-in Showers
The revised language clarifies the location of the entry at the end of the long side of the compartment (608.2.3)....
-
608.2.2.1 Clearance
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
-
3. Lavatory knee clearance
Lavatory knee clearance: To allow persons who use wheelchairs to pull under the lavatory and to use the faucet hardware, the following features need to be provided -- a 29-inch-high clearance...
-
Wheelchairs
storage in the cabin of wheelchairs or components of wheelchairs, including folding, collapsible, or breakdown battery-powered wheelchairs [Sec. 382.41(e)] as follows: • In overhead compartments...
-
F203 General Exceptions
For example, UFAS Section 4.17 contains provisions for wheelchair accessible toilet compartments, but does not contain provisions for ambulatory accessible toilet compartments....
-
E. Services in the Cabin
because, it is apparent, her disability limits her ability to reach up to the overhead compartment....
- Tork Elevation® Matic® Hand Towel Roll Dispenser with Intuition® Sensor, Black
- Salsbury Industries See Through Metal Locker Single Tier 3 Wide
- Salsbury Industries See Through Metal Locker Single Tier 1 Wide