E202.4 Functions Located in Maintenance or Monitoring Spaces (Section-by-Section Analysis) This section proposes to revise § 1194.3(f) of the existing 508 Standards to clarify that, where...
Search Results "Clear Deck Space"
-
E202.4 Functions Located in Maintenance or Monitoring Spaces (Section-by-Section Analysis)
-
11B-221.2.1.1 General seating
Wheelchair spaces complying with Section 11B-802.1 shall be provided in accordance with Table 11B-221.2.1.1....
-
11B-221.2.1.1 General seating
Wheelchair spaces complying with Section 11B-802.1 shall be provided in accordance with Table 11B-221.2.1.1....
-
Alterations and Water Closet Clearances in Single-User Toilet Rooms With In-Swinging Doors (Section-by-Section Analysis)
The 1991 Standards do not allow an in-swinging door in a toilet or bathing room to overlap the required clear floor space at any accessible fixture....
-
304.3.2 T-Shaped Space
304.3.2 T-Shaped Space. The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
-
Number and Location: ADA Standard Section 221.2.1
Section 221.2.1 covers scoping requirements in the current ADA Standards for the number and location of wheelchair spaces.
-
Maneuvering Space Where Ramps are Provided
Maneuvering Space Where Ramps are Provided At least one maneuvering space must be provided on the same level as the play component....
-
11B-802 Wheelchair spaces, companion seats, and designated aisle seats and semi-ambulant seats
11B-802 Wheelchair spaces, companion seats, and designated aisle seats and semi-ambulant seats [2010 ADA Standards] 802 Wheelchair Spaces, Companion Seats, and Designated Aisle Seats ...
-
11B-802 Wheelchair spaces, companion seats, and designated aisle seats and semi-ambulant seats
11B-802 Wheelchair spaces, companion seats, and designated aisle seats and semi-ambulant seats [2010 ADA Standards] 802 Wheelchair Spaces, Companion Seats, and Designated Aisle Seats ...
-
11B-221.2.1 Number and location
Wheelchair spaces shall be provided complying with Section 11B-221.2.1....
-
11B-221.2.1 Number and location
Wheelchair spaces shall be provided complying with Section 11B-221.2.1....
-
304.3.2 T-Shaped Space
The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
-
11B-502 Parking spaces
[See subsections ...]
-
11B-502 Parking spaces
[See subsections ...]
-
703.2.7 Character Spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
304.3.2 T-Shaped Space
The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
-
304.3.2 T-Shaped Space
The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
-
Pilot Rock CSL-6 and CSL-8 Car Stop
Series Overview Car Stops are made from 100% recycled plastic. They are maintenance free – withstand traffic, weather and salt. With the solid color throughout, they won’t chip...
-
Side Entry Openings, and Width and Length of Wheelchair Space
Side Entry Openings, and Width and Length of Wheelchair Space If the wheelchair space can only be entered from the side, the ride must be designed to permit sufficient turning space for...
-
Lines of Sight: ADA Standard Section 802.2
Lines of sight to the screen, performance area, or playing field for spectators in wheelchair spaces shall comply with 802.2....
-
Companion Seats: ADA Standard Section 221.3
Section 221.3 covers scoping requirements in the current ADA Standards for companion seats in assembly areas.
-
11B-802.2 Lines of sight
Lines of sight to the screen, performance area, or playing field for spectators in wheelchair spaces shall comply with Section 11B-802.2....
-
11B-802.2 Lines of sight
Lines of sight to the screen, performance area, or playing field for spectators in wheelchair spaces shall comply with Section 11B-802.2....
