Transfer supports shall be located within reach of the transfer surface and shall not obstruct transfer onto or off of the surface when in position.
Search Results "Box Seating"
-
M305.2.1 Location
- SciFit PRO1000 - Seated Upper Body Machine
-
Section 36.308 Seating in Assembly Areas (Section-by-Section Analysis)
Section 36.308(a)(1)(ii)(A) and (B) have been revised to provide that wheelchair and companion seats must be an integral part of the seating area, dispersed to all accessible seating levels...
-
3. Buttock-Popliteal Length
The median buttock-popliteal length provides an upper bound for the depth of a seating surface....
-
§ 36.302(f)(6) Hold and release of accessible seating
(6) Hold and release of accessible seating. ...
- GameTime GT Jam Box for PrimeTime Playground Equipment
- American Specialties Specimen Turntable Pass Box 0515
- American Standard AquaWash Telescoping Bidet Seat 5900A.05G
-
Sell-outs in specific seating areas. (Section-by-Section Analysis)
Under the second contingency, proposed § 36.302(f)(6)(ii), a facility could release unsold accessible seating in a specific seating area if all of the standard seats in that location were...
-
Sell-outs in specific seating areas. (Section-by-Section Analysis)
Under the second option, § 35.138(f)(2), a facility could release unsold accessible seating in a specific seating area once all of the standard seats in that location were sold out. ...
-
Release of unsold accessible seats. (Section-by-Section Analysis)
Proposed § 36.302(f)(6) provides regulatory guidance regarding the release of unsold accessible seats. ...
-
Dispersion of Wheelchair Seating Areas (Preamble, Section-by-Section Analysis)
- Dispersal of wheelchair seating areas in theaters will be required only where there are more than 300 seats, rather than in all cases....
-
Guidelines for Requirement 2
fountains and water coolers; toilet rooms and bathing facilities, including water closets, toilet rooms and stalls, urinals, lavatories and mirrors, bathtubs, shower stalls, and sinks; seating...
-
Release of unsold accessible seats. (Section-by-Section Analysis)
Section 35.138(f) provides regulatory guidance regarding the release of unsold accessible seats. ...
-
M305.2.2 Length (Section-by-Section Analysis)
In the MDE NPRM there was no requirement for length of the transfer support; however, the MDE NPRM preamble noted that the Access Board was considering requiring the transfer...
-
5.7 Lift Compatibility
5.7 Lift Compatibility.
-
5.7 Lift Compatibility Recommendations
5.7 Lift Compatibility Recommendations
-
T215.1 General
Communication features on non-rail vehicles shall comply with T215.
-
T215 Communication Features
[See subsections ...]
-
T303.3.1 Seat-Back Handhold Cross Section
The cross section of seat-back handholds shall have an outside diameter of 7/8 inches (22 mm) minimum and 2 inches (50 mm) maximum....
-
Handrails, Grab Bars, and Tub and Shower Seats [4.26]
Handrails, Grab Bars, and Tub and Shower Seats [4.26] ADAAG 4.26 provides technical requirements for: handrails at ramps [4.8] and stairs [4.9] grab bars at water closets...
-
Wheelchair seating locations must be on an accessible route
• Wheelchair seating locations must be on an accessible route that provides access from parking and transportation areas and that connects to all public areas, including concessions, restaurants...
- Thinking Out of the Box Engineering Applications (TOBEA)
-
3.2 Getting on the Table
An accessible table allows for a more thorough exam, as compared to an exam where you remain seated in your wheelchair or on a chair....