Nonworking parts, such as platform, frame, and attachment hardware which would not be expected to wear, shall have a safety factor of at least three, based on the ultimate strength of the...
Search Results "BHMA: Builders Hardware Manufacturers Association"
-
§ 38.23(b)(1) Design load
-
§ 38.95(b)(1) Design load
Nonworking parts, such as platform, frame, and attachment hardware which would not be expected to wear, shall have a safety factor of at least three, based on the ultimate strength of the...
-
§ 38.125(b)(1) Design load
Nonworking parts, such as platform, frame, and attachment hardware which would not be expected to wear, shall have a safety factor of at least three, based on the ultimate strength of the...
-
§ 38.83(b)(1) Design Load
Nonworking parts, such as platform, frame, and attachment hardware which would not be expected to wear, shall have a safety factor of at least three, based on the ultimate strength of the...
-
Bobrick Koala Kare Baby Changing Station Installation Video
This video from the manufacturer shows a Bobrick Koala Kare Baby Changing Table being installed....
-
Ohio Gratings Aluminum Swaged Bar Grating Video
A brief explanation and demonstration video of Aluminum Swaged Bar Grating, manufactured by Ohio Gratings, Inc....
-
Bobrick Koala Kare Baby Changing Station Product Features Video
This video from the manufacturer shows the product features of the Bobrick Koala Kare Baby Changing Table....
-
Sargent 281 Series Cast Iron Door Closer
Features ANSI/BHMA Grade 1 (A156.4) Meets Buy America Act Conforms to UL10C and UBC for positive pressure fire test 10 Year Warranty Versatile mounting applications permit...
-
Subpart F-Certification of State Laws or Local Building Codes (Section-by-Section Analysis)
Many commenters, including business organizations, a professional association, disability rights groups, and individuals with disabilities, urged that the Department take steps overall to...
-
§382.133(f)(2)
(2) Any applicable requirement for a manufacturer-affixed label to reflect that the device has been tested to meet requirements for medical portable electronic devices set by the FAA for...
-
§ 35.151(b)(4)(iii)(B)(1)
(1) Costs associated with providing an accessible entrance and an accessible route to the altered area, e.g., the cost of widening doorways or installing ramps;...
-
§ 36.403(f)(2)(i)
(i) Costs associated with providing an accessible entrance and an accessible route to the altered area, for example, the cost of widening doorways or installing ramps;...
-
Sec.36.403(f)(2)(i)
(i) Costs associated with providing an accessible entrance and an accessible route to the altered area, for example, the cost of widening doorways or installing ramps;...
-
412.1 General
Where ICT displays or processes video with synchronized audio, ICT shall provide a mode of operation that plays associated audio description....
-
§ 35.151(b)(4)(iii)(B)(1)
(1) Costs associated with providing an accessible entrance and an accessible route to the altered area, for example, the cost of widening doorways or installing ramps;...
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
2. a. iii. Costs
issues that should be evaluated in choosing a new business location: Adequate accessible parking, Accessible entrance, Doors at entrances, Accessible door hardware...
-
Is compliance on both sides of a door or gate required when it is usable only from one side?
Examples include exit-only doors with no operating hardware on the exterior side or separate enter and exit fare gates in transit stations....
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
§ 38.159(b)(1) Design load
Nonworking parts, such as platform, frame and attachment hardware which would not be expected to wear, shall have a safety factor of at least three, based on the ultimate strength of the...
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware. ◼...
-
§ 36.403(f)(2)(iii)
(iii) Costs associated with providing accessible telephones, such as relocating the telephone to an accessible height, installing amplification devices, or installing a text telephone (TTY...
-
§ 35.151(b)(4)(iii)(B)(3)
(3) Costs associated with providing accessible telephones, such as relocating a telephone to an accessible height, installing amplification devices, or installing a text telephone (TTY);...
-
§ 36.403(f)(2)(iii)
(iii) Costs associated with providing accessible telephones, such as relocating the telephone to an accessible height, installing amplification devices, or installing a text telephone (TTY...
